Rotary Plug Valve Type 72.4
1 / 7ページ

{{requestButtons}}

カタログの抜粋

Rotary Plug Valve Type 72.4 - 1

Data Sheet Rotary Plug Valve Type 72.4 Double eccentric control valve for process engineering and industrial applications Valve size Nominal pressure Temperature Valve body made of   Cast/carbon steel or Stainless cast/carbon steel Metal sealing, armored or unarmored Soft sealing The valves can be equipped with different accessories, such as positioners, solenoid valves and other accessories according to VDI/VDE 3845. Standard version For temperatures from –100 to 400 °C (–148 to 752 °F) Version Sandwich-style body (no flanges)   DN 25 to DN 300, PN 10/PN 16/PN 25/PN 40, faceto-face dimensions acc. to EN 558-1, Table 16, Series 36 NPS 1 to NPS 12, Class 150/Class 300, face-to-face dimensions acc. to EN 558-2, Table 16, Series 36 VETEC Type 72.4 Rotary Plug Valve (example with mounted Type AT Actuator) TA-Luft packing/double packing Special materials for body and trim Noise-reducing features Flange version with tongue/groove according to EN 1092-1 RF according to ANSI Versions for higher and lower temperatures on request

カタログの1ページ目を開く
Rotary Plug Valve Type 72.4 - 2

Principle of operation The shaft/plug arrangement is eccentric (Figs. 3 and 4). The double-eccentric design of the rotary plug valve is achieved in combination with the offset of the plug's pivot. When turning the plug shaft from closed position in opening direction, the double-eccentric design allows the plug to lift off the seat smoothly without initial breakaway torque. The valve is not opened suddenly and shows a stable control response even with small opening angles. The rotary plug valve can be used for both directions of flow. Double-eccentric principle For gases and vapors, the...

カタログの2ページ目を開く
Rotary Plug Valve Type 72.4 - 4

Table 3. Kvs and Cv coefficients 3a. seat with metal sealing FTO

カタログの4ページ目を開く
Rotary Plug Valve Type 72.4 - 5

3c. seat with soft sealing Flow rate Table 4: Weight in kg (without actuator)

カタログの5ページ目を開く
Rotary Plug Valve Type 72.4 - 7

VETEC Ventiltechnik GmbH Siemensstraße 12 · 67346 Speyer Telefon: 06232 6412-0 · Fax: 06232 42479 · E-mail: vetec@vetec.de · Internet: www.vetec.de Sitz der Gesellschaft: 67346 Speyer · Registergericht: Amtsgericht Ludwigshafen HRB 51677 · USt-IdNr.: DE149689913 · Geschäftsführer: Uwe Vogel

カタログの7ページ目を開く

SAMSON/サムソンのすべてのカタログと技術パンフレット

  1. Actuator Type S

    3 ページ

  2. Actuator Type MZ

    4 ページ

  3. Actuator Type MN

    3 ページ

  4. Actuator Type MD

    3 ページ

  5. Actuator Type R

    3 ページ

  6. Actuator Type AT

    4 ページ

  7. SAMSON Positioners

    28 ページ

カタログアーカイブ

  1. T21 11

    6 ページ