カタログの抜粋
Wall Mounting Alarm Annunciator System Flexible Alarm System supplied ready to mount on site Modular construction from 1 to 256 alarm channels Complete alarm system with all required terminals, audibles, power supplies and pushbuttons Choice of different Annunciators Choice of enclosure material Ready for immediate installation on site Available with different power supply arrangements The Wall Mounting Annunciator range is supplied as a finished Alarm System ready to mount onto a wall or vertical structure. The system is a fully operational Annunciator System complete with MCB, Power Supply, audible, control pushbuttons and terminals. All alarm ways are wired to terminals ready for direct connection on site through the bottom mounted un-drilled gland plate. All that is required is the connection of the supply voltage and the alarm contacts. The System can be supplied with a choice of different Annunciators depending on the application requirements. The Annunciator can include a Power Supply, DC/DC Converter or battery backed standby supply.
カタログの1ページ目を開く
Technical Specification Annunciator Systems can be provided fitted with the 725B, Series 725, UC625 or SIL725 Alarm Annunciator. Please see separate datasheets on these products for full technical specification. Enclosures The Annunciator can be supplied in the following enclosures, sized to suit the Annunciator being fitted: Stainless steel (304 or 316) Mild steel coated in epoxy polyester in light grey (RAL7035) Glass reinforced Polyester (GRP) Hinges are always fitted on the left unless requested otherwise. Wall Mounting The wall mounting boxes are all equipped with a means of mounting...
カタログの2ページ目を開くRTKのすべてのカタログと技術パンフレット
-
Multiplexers2 ページ
-
PPM4-P Process Meter2 ページ
-
Multiplexers2 ページ
カタログアーカイブ
-
P766 Signal Isolator2 ページ
-
DF30 Display Facia4 ページ
