カタログ >
RINGSPANN >
RCS® Remote Control Systems

RCS® Remote Control Systems
1 / 64ページ

カタログの抜粋

Remote Control Systems Push/Pull Cables • Control Levers • Pedals • Pull Only Cables RINGSPANN® Registered Trademark of RINGSPANN GmbH, Bad Homburg RCS® Registered Trademark of RINGSPANN RCS GmbH, Oberursel

カタログの1ページ目を開く

RINGSRANIM* RCS® Remote Control Systems Issue 08/2018 - We reserve the right to make technical modifications.

カタログの2ページ目を開く

Setup and description of push/pull cables Setup A flat wire-reinforced inner member is located in a conduit, which is formed by an inner-lying inner tube and specially arranged longitudinal wires (linear wire stranding). The linear wires on the other hand (with the exception of types 770) are supported and fixed by a support wire winding. A plastic extrusion is doing the outer coverage of the conduit. For the universal connection of elements, the inner member and conduit are supported with pressed on zinccoated or stainless steel end parts. The push/pull cables are designed lightly gliding...

カタログの3ページ目を開く

Cable sizes • Travel up to 76 mm • Push forces 70 N • Pull forces 450 N • Travel up to 152 mm • Push forces 135 N • Pull forces 540 N • Travel up to 152 mm • Push forces 225 N • Pull forces 1 035 N RINGSPANN* • Travel up to 152 mm • Push forces 450 N • Pull forces 1800 N • Travel up to 152 mm • Push forces 1 350 N • Pull forces 4 500 N * upon request

カタログの5ページ目を開く

RINGSRANIM* Our cable series are offered in five sizes. In the standard version, three end part configurations are designed. There are six different types of travel, which can be combined with three different seals. A multitude of additional possibilities for configuration and variation in the setup of the cables are possible in order to create a solution that fits to the respective application. Series 383 and 384 • Series 383 with zinc-coated end parts and stainless steel rod ends • Series 384 with stainless steel end parts • PTFE-covered inner member • Highly efficient without stick-slip...

カタログの6ページ目を開く

RINGSRANIM* Series 275 and 274 • Series 275 with zinc-coated end parts and stainless steel rod ends • Series 274 with stainless steel end parts • Inner member stainless steel reinforced • Highly efficient • Remarkably small bend radii • Extremely smooth • High travel frequencies • Colour: blue • For cable sizes U, V, L and M • High temperature range from -50 °C to +90 °C (constant) and short term up to +110 °C Series 775 and 774 • Series 775 with zinc-coated end parts and stainless steel rod ends • Series 774 with stainless steel end parts • Attractive pricing • Highly efficient • For...

カタログの7ページ目を開く

Selection of cable sizesCable sizes, maximum travel, bend radii, seals, thread rod ends, outer diameter of conduits and push and pull forces depending on the travelCable sizes, maximum travel, bend radii, seals, thread rod ends and outer diameter of conduit Cable size Push and pull forces depending on the travel The specified forces are applicable for use in permanent operation with a long service life. A safety factor of 1.5 can be used to calculate the temporary overloads. Push forces diagram 3500

カタログの8ページ目を開く

RINGSRANIM* Efficiencies The efficiency of a push/pull cable (the relation of the required cable operating force to a given output force) is particularly influenced by the number of bends laid in the cable. The cable operating force can be calculated in accordance with the following formula: Operating force = Output force x Efficiency factor a is the sum of all cable bends in degrees. In addition to the cable bends, the cable length is to be taken into consideration with 15° for every 1 meter. Example of efficiency factor Cable series Cable size Cable length Sum of bends alpha Efficiency...

カタログの9ページ目を開く

RINGSRANIM* Connection types of cable end parts Seal no. 10 Automatic self-adjusting PTFE wiper seal in case of wear for cable sizes U, V and L. Protects well against fine dust. Seal no. 20 Design like seal no. 10 with additional double spring-loaded metal wiper, for cable sizes L, M and H. For extreme conditions such as sludge, coarse dirt and ice. Wiper seals Seal no. 05 The rubber wiper seal has been proven for all cable sizes for normal applications in the entire machine construction. Upon request also with a support tube from stainless steel. Lubrication RCS® push/pull cables are...

カタログの10ページ目を開く

* Rod end in mid position ** Rod end completely moved out (see from page 22), TL (1) = variant 1, TL (2) = variant 2 (see page 25) *** Rod end in mid position (see from page 32) Can also be supplied with end parts made of stainless steel. 11

カタログの11ページ目を開く

Can also be supplied with end parts made from stainless steel. * Rod end in mid position ** Rod end completely moved out (see from page 22), TL (1) = variant 1, TL (2) = variant 2 (see page 25) *** Rod end in mid position (see from page 32)

カタログの12ページ目を開く

* Rod end in mid position ** Rod end completely moved out (see from page 22), TL (1) = variant 1, TL (2) = variant 2 (see page 25) *** Rod end in mid position (see from page 32) **** only for hand operation TL and MA, not available for NL Dimensions E for cable size L and travel: Dimensions D for cable size and travel: Cable size Cable size Cable series 275 and 283 are available for cable sizes U-M. The cable size H can only be supplied with cable series 283. "S" denotes the rigid cable ends for cable sizes U, V, M and H. "R" is the designation for a rigid end for cable size L.

カタログの13ページ目を開く

Codes of practice and health and safety regulations Codes of practice • Do not install push/pull cables in any applications, which may exceed the design parameters of the cable. • Cables that have moisture inside or are frozen should be replaced. Do not apply heat to remove moisture. • Do not remove seals! RCS® cables cannot be disassembled! • Protect cables from physical damage such as bending, crushing, heavy vibration and from contamination such as moisture, dirt or chemicals. Do not paint ends! • RCS® push/pull cables are designed and lubricated for optimum performance and life; under...

カタログの14ページ目を開く