カタログ >
RIFTEK EUROPE >
Equivalent Conicity Calculation Program. User manual

Equivalent Conicity Calculation Program. User manual
1 / 10ページ

お気に入りに追加する　

カタログの抜粋

Equivalent Conicity Calculation Program. User manual - 1

Equivalent Conicity Calculation Program User's manual www.riftek.com info@riftek.com

カタログの1ページ目を開く

Equivalent Conicity Calculation Program

カタログの2ページ目を開く

Equivalent Conicity Calculation Program Equivalent Conicity is a parameter that is used when investigating dynamic interaction between railways vehicle and track. The parameter describes behavior of contact between wheels and rails for straight and large radius parts of track. Calculated parameters The program calculates the next parameters: § Contact points position. § Rolling radiuses difference depending on displacement of wheel set. § Contact angles and their difference depending on displacement of wheel set. § Equivalent Conicity. Calculations are made in accordance with EN 15302....

カタログの3ページ目を開く

Equivalent Conicity Calculation Program. User manual - 4

Equivalent Conicity Calculation Program Click Next to continue with the installation and follow the guidelines in dialog boxes of the installer. To update the program, you can use the tool, that was installed with Equivalent Conicity Calculation Program. It can be found in the list of installed programs: Activation Upon successful installation run the program and complete the Product Activation form: Customer information: Full Name - Customer's representative name. Company - Customer's company name. Postal Address - Customer's postal address. E-mail - Customer's e-mail. Country - Customer's...

カタログの4ページ目を開く

Equivalent Conicity Calculation Program. User manual - 5

Equivalent Conicity Calculation Program Coordinate systems Wheel profile has to be described in coordinate system shown on the next picture: 5 Coordinate system for rail profile description is shown below: Data sources The program can use the next data sources: § Wheel profiles files obtained by Laser wheel profilometer IKP-5 https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheelprofile-gauge-ikp § Rail profiles files obtained by Laser rail profilometer PRP https://riftek.com/eng/products/~show/instruments/railway-devices/rail-profilemeasurement-gauge-prp § Any...

カタログの5ページ目を開く

Equivalent Conicity Calculation Program. User manual - 6

Equivalent Conicity Calculation Program Work with program Once the program is started the main window emerges. The tab Wheel and Rail profiles displays wheels profiles (red color) and rail profiles (blue color). Profiles files have to be placed in the Data folder, in the same directory with Equivalent Conicity.exe program. Preparations for calculation Parameters for calculation Parameters setting panel is placed in the left part of main window. It is necessary to fill corresponding fields with wheel set and track parameters. Rail inclination should match the illustration below. Result file...

カタログの6ページ目を開く

Equivalent Conicity Calculation Program. User manual - 7

Equivalent Conicity Calculation Program Parameters for protocols In the same panel is a group of parameters used only when generating reports: Input data files By default, the program uses profiles files placed in the folder Data, in the same directory with Equivalent Conicity.exe program You can show other ways to files and download them into program by Load button.

カタログの7ページ目を開く

Equivalent Conicity Calculation Program. User manual - 8

Equivalent Conicity Calculation Program On completing of preparation according to point 4.1. click Calculate button. The calculation results are displayed in the respective tabs: Equivalent conicity Rolling radius difference relative to the wheelset displacement

カタログの8ページ目を開く

Equivalent Conicity Calculation Program. User manual - 9

Equivalent Conicity Calculation Program 9 Contact points between wheels and rails Left and right contact angles and difference between angles relative to wheelset displacement Protocols To save results, click the Save as PDF button, select the path and the file name. To print protocols, click Print. Examples of protocols:

カタログの9ページ目を開く

Equivalent Conicity Calculation Program. User manual - 10

Equivalent Conicity Calculation Program Technical support Technical support is provided through: § E-mail support@riftek.com § Skype: riftek_support When contacting technical support please inform the version of the Equivalent Conicity Calculation Program, and explain the problem. The RIFTEK staff supports customers according to the Equivalent Conicity Calculation Program license.

カタログの10ページ目を開く