カタログ >
RENISHAW/レニショー >
Data sheet: MH20 and MH20i

Data sheet: MH20 and MH20i
1 / 4ページ

カタログの抜粋

MH20 and MH20i Manual adjustable probe heads with module changing • Incorporates TP20 kinematic mount • �� Incorporates TP20 kinematic mount • Infinite positioning within the • 168 repeatable positions in 15° increments� . with two axis adjustable swivel. changing, providing head adjustment has not taken place. with two axis indexing. movement envelope of the head. • Repeatable TP20 stylus module • Repeatable TP20 stylus module changing in each pre-qualified posi

カタログの1ページ目を開く

Datasheet H-1000-2195-03-A MH20 & MH20i family The MH20 and MH20i are manually operated probe heads that articulate to provide orientation of the probing axis. MH20 provides non-repeatable orientation, while MH20i permits repeatable indexing in 15° increments. Both heads feature TP20 kinematic probe module mounting, allowing repeatable stylus module changes. MH20 and MH20i are compatible with the full range of TP20 stylus modules, which comprises 5-way versions with length or trigger force options and a 6-way version. Both heads feature a red LED, which indicates probe status, controlled by...

カタログの2ページ目を開く

Probing forces and overtravel limits TP20 probe module The TP20 probe module houses the kinematic switching touch mechanism, carries the stylus assembly and provides overtravel in the X, Y, and +Z axes. Probe module stylus length Alignment Trigger force symbols Nominal at The probe module is held in position on stylus tip the head by a highly repeatable kinematic XY coupling. Electrical contact pins conduct the probe sense voltage through the coupling. Features are also included which minimise the possibility of Z a mis-aligned probe module generating a probe-seated signal. The M2 stylus...

カタログの3ページ目を開く

Renishaw plc New Mills, Wotton-under-edge, Gloucestershire, GL12 8JR United Kingdom ❃ Length - see chart on previous page ❃ Length - see chart on previous page ❖ from shank mounting face Part numbers and ordering information MH20 and MH20i are supplied with the shank fitted. To select the correct shank for your application please refer to H-1000-5050 section 9, then follow the part number selection criteria detailed below. Description Part number MH20 + MS1/T Shank A-4043-xx01 * MH20 + MS2/T Shank A-4043-xx02 * MH20 + MS3/T Shank A-4043-xx03 * MH20 + MS5/T Shank A-4043-xx05 * MH20 + MS7/T...

カタログの4ページ目を開く