カタログの抜粋
Precut shims LAMI BLOC® positioning of machine sets During installation of rotating equipment, positioning accuracy down to only a few hundredths of a millimeter becomes crucial. Less stringent standards may lead to less than optimal support for the machine feet during operation, which can then lead to vibration breakdowns and enormous down- time expense. Prevention of such unpleasant surprises can be quite painless, since the cause is often very basic; for example, lack of shims of proper size and thickness during installation. Such preventive medicine can even pay for itself during machine alignment.
カタログの1ページ目を開く
laminated shims Exactly 1 mm thick and easily peeled down to the required Available in eight different sizes to fit machine feet of nearly any Available in hard brass or in- stainless steel for utmost resis- tance to corrosion by acids and Laminated together in perfectly flat layers to avoid vibration and 'soft foot' when stacked to- gether - even when shimming several millimeters at a time! Sorted according to their four sizes in the handy LAMIBLOC® case, along with a practical peeling knife and a micrometer. Saves time and money, provid- ing a safe and practical alterna- tive to hand-cut...
カタログの2ページ目を開く
PERMABLOC® precut shims Available in four different ma- chine foot sizes, each in eight different thicknesses to provide just the right alignment correc- tion for almost any machine. Made of high-quality stainless steel to prevent corrosion when exposed to acids and alkalis. ^^manently marked with thick- ness and dimensions for posi- tive identification at a glance. Fully deburred and with rounded corners to reduce dan- ger of cuts during alignment Perfectly flat to ensure stable, consistent machine support over their entire surface. that no more than three shims are usually needed to...
カタログの3ページ目を開く
contains 160 laminated shims. Each 1 mm shim is composed of 8 layers 0.1 mm thick and 4 layers 0.05 mm thick. The various layers are colored for easy recognition when peeling shims to the required Each of the four PERMABLOC® cas- es contains shims in eight different thicknesses, each separated from the others by clearly-marked divid- ers, so that the right shim size and thickness are always at your finger- tips. The welded steel case itself is extremely rugged; the largest case From left to right: all four PERMABLOC® sizes with a total of 640 shims. OPTALIGN®, the first name in laser-...
カタログの4ページ目を開くPRÜFTECHNIK Alignment Systems GmbHのすべてのカタログと技術パンフレット
-
SHAFTALIGN Touch4 ページ
-
OPTALIGN Touch4 ページ
-
ROTALIGN Touch4 ページ
-
Brackets5 ページ
