Modular Power, Signal Connectors SCORPION Series
1 / 32ページ

Modular Power, Signal Connectors SCORPION Series

SCORPION Series Power contact options: ranging from 16 to 120 amps plus the ability to add signal contacts and a variety of accessories. Overall Length Calculation 03 Blind mating, float mount, panel mount and cable connector Part Number Definition 04 Technical Specifications 06 options with unique locking system. Typical Connector Systems 08 PC Mount, crimp, and press fit terminations. Temperature Rise Curves 10 Venting option for improved air cooling. Guide & Locking Systems 11 Venting Features 11 Blank modules contact spacing for higher voltage needs. Solid machined, precision formed...

OVERALL LENGTH CALCULATION Using existing tooling the maximum length is 101.00mm. Positronic is proud to participate in PICMG 3.8. The Scorpion series was chosen as the PICMG 3.8 power connector. PICMG® logo is a registered trademark of the PCI Industrial Computers Manufacturers Group. Notes: 1 A Scorpion part number can be a maximum of 30 characters. If the connector configuration exceeds this number, please consult sales for a special part number for your unique requirement. 2 Pinout sequence may not be continuous. Consult sales for more information. 3 Consult sales for connector length...

Male Male Male Male Female Female Female Female Female Female f. STEP 1 - BASIC SERIES SP - Scorpion Series STEP 1 - GUIDE AND LOCKING OPTIONS 1 - Super Blind Mating System, up to 3.80 [0.150] misalignment. 2 - Blind Mating System, up to 2.00 [0.079] misalignment. 3 - Locking Latch System, for cable to cable connectors only. 4 - Locking Latch System, for male cable to female panel/board connectors only. 5 - Locking Latch System, for female cable to male panel/board connectors only. 6 - End Module, for Use with Jackscrew System. 7 - Blind mating system, 4.50 [0.177] width, up to 2.00 [0.079]...

STEP 10 - ENVIRONMENTAL COMPLIANCE OPTIONS /AA - Compliant per EU Directive 2011/65/EU (RoHS). Example: SP2GNKNB4M0N9A1/AA Note: 1 - This step will not be used if compliance to environmental legislation is not required. Example:SP2GNKNB4M0N9A1 2 - Code A2, C2 and D2 of step 9 will not comply to environmental legislation. STEP 9 - CONTACT PLATING 1 - Crimp contacts ordered separately. A1 - Gold flash over nickel on mating end termination end. A2 - Gold flash over nickel on mating end and 0.005[0.0002] tin-lead solder coat on termination end. Not available with code 93, 938 in step 4. C1 -...

Note: *Hyperboloid Contacts Modules are not UL recognized as presently configured. MATERIALS AND FINISHES Insulators:

MECHANICAL CHARACTERISTICS Super Blind Mating System Removable Contacts Install contact from rear face of insulator, release from front face of insulatorwith a contact extraction tool, thereafter extract contact from rear face of insulator. Size 8, Size 12, Size 16, Size 18 and Size 22 female contacts feature “Closed entry” design for highest reliability. Keying Features 8 different positions are available. 2-D DRAWINGS & 3-D MODELS Removable Contact Retention in Connector Body per IEC 512-8, Test 15a Size 4 Contacts Size 8, Size 12 and Size 16 Contacts Size 18 Contacts Size 22 Contacts Non...

SCORPION Series TYPICAL CONNECTION SYSTEMS BOARD TO PANEL WITH BLIND MATING SYSTEM FEMALE CONNECTOR Female Panel Mount Connector Typical part number: SP2YN4TND1F0091 (Contacts ordered separately) Male Right Angle (90º) PCB Mount Connector Typical part number: SP2YN4TND4M0B9A1 MALE CONNECTOR CABLE TO BOARD WITH LOCKING LATCH SYSTEM Male Right Angle (90º) PCB Mount Connector Typical part number: SP5SNHKN4BC4M000A1 MALE CONNECTOR Female Cable Connector Typical part number: SP5SNHKN4BC1F0001 (Contacts ordered separately) FEMALE CONNECTOR BOARD TO BOARD WITH BLIND MATING SYSTEM Male Right Angle...

TYPICAL CONNECTION SYSTEMS MALE CONNECTOR Male Right Angle (90°) PCB Mount Connector Typical part number: SP2GGYNTN2ANB48M0LN9A1 BOARD TO CABLE WITH CRIMP CONTACTS PASS-THROUGH In Scorpion series, PCB mount and crimp contacts can be mixed in one insulator housing. Female Straight PCB Mount Connector with Crimp Contacts Pass-through Typical part number: SP2GGYNTN2ANB38F0N9A1-PA*** (Crimp contacts ordered separately) Consult sales for your unique requirements. FEMALE CONNECTOR Female Cable Connector Typical part number: SP6YENKKNAB3F0T0A1 FEMALE CONNECTOR BOARD TO CABLE WITH JACKSCREW SYSTEM...

SCORPION Series TEMPERATURE RISE CURVES Tested per IEC Publication 512-3, Test 5a SIZE 8 Rated Current (Amps) Rated Current (Amps) Rated Current (Amps) a Developed with 2 size 4 high conductivity contacts seated in code UU modules. a Developed with 2 size 8 high conductivity contacts seated in code RR modules. a Developed with 2 size 12 high conductivity contacts seated in code E module. b Developed with 2 size 4 standard conductivity contacts seated in code UU modules. b Developed with 2 size 8 standard conductivity contacts seated in code RR modules. b Developed with 2 size 12 standard...

SUPER BLIND MATING GUIDE SYSTEM - SP1 SP1 Dimension W CODE 1 (STEP 2) SP2 CODE 2 OR CODE 7 (STEP 2) BLIND MATING GUIDE SYSTEM - SP2 r~ 14.60 [0.575] MALE CABLE TO FEMALE PANEL/BOARD LOCKING LATCH SYSTEM - SP4 FEMALE CABLE TO MALE PANEL/BOARD LOCKING LATCH SYSTEM - SP5 SP4 CODE 4 (STEP 2) CABLE TO CABLE LOCKING LATCH SYSTEM - SP3 JACKSCREW SYSTEM - SP6 1 14.60 [0.575] J_ g_._ Jl SP3 CODE 3 (STEP 2) SP6 CODE 6 (STEP 2) VENTING FEATURES CONTACT SIZES Venting feature is an outlet hole enabling air cooling onto a power contact. In compliance with UL 1977 safety standard, section 10.2...

All modules shown on page 12 and 13 are male modules with the exception of size 22 precision formed female signal contact modules. Consult sales for availability of other modules. SIZE 4 POWER CONTACT MODULE SIZE 8 POWER/SHIELDED CONTACT MODULES MODULE U SIZE 12 POWER CONTACT MODULES MODULE E SIZE 16 POWER CONTACT MODULES MODULE A MODULEB SIZE 18 POWER CONTACT MODULES MODULE X

SIZE 22 SIGNAL CONTACT MODULESMODULE H MODULEJ '0 SIZE 22 PRECISION FORMED FEMALE SIGNAL CONTACT MODULESMODULE L T 14.60 [0.575] 1 Available for Female Right Angle(90°) PCB mount termination. Consult sales for availability of other termination. KEYING MODULES Available for PCB mount termination. Consult sales for crimp contact terminations.