Cutting Machine D 80
1 / 2ページ

カタログの抜粋

Description of the POLAR D 80 ECO The cutter POLAR 80 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface equipped with air jets allows an easy handling of the material. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned control panel with 5.5'' monochrome display and additional membrane keypad. Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according to the material. Customer benefits Extensive programming options with a memory capacity of 198 programs Easy knife change with automatic interruption in the lower dead end and knife fine adjustment from the front Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy Minimal maintenance requirements due to the use of novel material Edition: 05.2019 \\ Subject to technical alterations. Further technical data are available for download on our website. POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer StraGe 16-42 \\ 65719 Hofheim \\ Germany info@polar-mohr.com \\ www.polar-mohr.com

カタログの1ページ目を開く

Description of the Polar D 80 PLUS The cutter POLAR 80 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface equipped with air jets allows an easy handling of the material. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via...

カタログの2ページ目を開く