カタログ >
POL-EKO sp.k. >
Compact Line DCL-1200 SS

Compact Line DCL-1200 SS
1 / 2ページ

カタログの抜粋

Data sheet Fume hood Standard equipment for fume hoods: - structure entirely made of galvanized steel without the use of wood-based materials - worktop at a height of 900mm made of monolithic ceramics with a raised rim with a suspended ceramic sink 280x80mm - toughened glass window, lifted manually with counterweight, opened upwards with a lock at the height of 500 mm (max 810mm), and additionally sliding glass (right / left). The window has a system preventing the uncontrolled drop of the window - 2 electric sockets 230V 50Hz - 2 water spouts with valves on the BROEN front panel - energy-saving linear LED lighting separated from the fume hood with a glass pane - double system the back wall with exhaust slots in the upper and lower part ensuring proper extraction of vapors lighter or heavier than air without turbulence and dead zones - safety ﬂap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber - full monitoring set Schneider brand) air ﬂow velocity in the fume cupboard window compliant with the PE-EN 14175 standard - CE Declaration of Conformity: PN-EN 14175; PN-EN 14056; PN-EN 13150

カタログの1ページ目を開く

TECHNICAL DATA - DIMENSIONS overall dims [mm] width A working space dims (mm) width D TECHNICAL DATA recommended airﬂow [m3/h] required capacity of the ventilation system [m/s] power supply diameter of the air outlet stub [mm] water supply sewage connection diameter [mm] electrical insulation standard ventilation system double rear wall illumination installed outside the working chamber LED, class A ++, through insulating glass / from operator panel frame and housing material standard: - FM 550-A-0-E controller with a speed sensor AFS 100 in the fume hood window and the FA-0025-3 operator...

カタログの2ページ目を開く