カタログの抜粋
General Purpose, 150 kHz Resonant Frequency Acoustic Emission Sensor Description and Features Operating Specifications The Alpha series family of sensors features SMA connectors versus the Microdot connectors found on PAC’s RXX series of passive sensors. The Alpha series includes R3α, R6α, R15α, R30α R50α, R80α and WSα sensors. The major improvements in Alpha series over the RXX series include: • Use of the more popular SMA type of connector. • Cavity is machined from a solid stainless steel rod mak ing for a simpler and more robust design. • Dramatically increased thickness of the ceramic shoe for better mechanical stability. • Distance from the bottom of the ceramic shoe to the bottom edge of sensor cavity increased for better insulation resistance and ground avoidance. • Introduced a 30-degree angle at the bottom edge of the sensor cavity. All these improvements make the Alpha series sensors more robust, reliable and greatly reduce the possible grounding of the cavity to the structure caused by wet environment. Sensor to Preamp Cable Applications This general purpose sensor provides a good combination of high sensitivity and low-frequency rejection. These properties make the sensor very useful for monitoring common structures such as pipelines, vessels, bridges, and storage tanks in petroleum, refineries, chemical plants, offshore platforms, as well as factory and process monitoring applications. Completely enclosed crystal for RFI/EMI immunity Sensors include NIST Calibration Certificate & Warranty Frequency response of the R15α. Calibration based on ASTM E1106; Calibration based on ASTM E976. Products & Systems Division 195 Clarksville Road, Princeton Junction, NJ 08550 Phone: 609-716-4000 Fax: 609-716-0706 Email: sales.systems@mistrasgroup.com Internet: www.mistrasgroup.com Due to continuing improvement, MISTRAS Group, Inc. reserves the right to amend specifications without notice. Copyright © 2010 MISTRAS Group Inc. All Rights Reserved.
カタログの1ページ目を開く