SERIES KG IMPACT SENSOR AND PROGRAMMER
1 / 4ページ

お気に入りに追加する　

{{requestButtons}}

カタログの抜粋

Quality Management System Certified INDUSTRIAL AUTOMATION

カタログの1ページ目を開く

SERIES KG IMPACT SENSOR KG1 IMPACT SENSOR PRINCIPLE OF OPERATION The Series KG Impact Sensor constantly monitors the impact of the mass to which it is attached. It provides a time-based signal driven by two user-defined set points indicating excessive impact. A PLC can interpret this signal and warn of erratic operation or shut down a system to prevent catastrophic failure. The signal is fail-safe meaning a normally closed signal is provided during normal operating conditions. Absence of the signal indicates excessive impact or a problem. When an impact exceeds the non-latching (warning)...

カタログの2ページ目を開く

SPECIFICATIONS & OPERATION: SERIES KG IMPACT SENSOR ± 5g OPERATING FREQUENCY RESPONSE TIME OPERATING TEMPERATURE ENVIRONMENTAL PROTECTION SUPPLY VOLTAGE INSTANTANEOUS IMPACT (Figure 1) As normal impact increases and exceeds the non-latching point, the fail-safe signal drops for 50 milliseconds with every excessive impact. A PLC monitoring the signal can utilize timer logic to issue an appropriate action, alert, or warning. When the impact increases beyond the latching point, the fail-safe signal permanently drops and the PLC can shut the machine down to prevent catastrophic failure. LED...

カタログの3ページ目を開く

ACCESSORIES: SERIES KG SERIES KG PROGRAMMER Features Use of the optional Series KG Programmer unlocks the total potential and flexibility of the Series KG Impact Sensor. With the programmer, the end user is able to modify the circuit type (NPN or PNP), whether the sensor is in dual or single point mode, and what the value of these set points is. In addition, the programmer simplifies setting up the Series KG Impact Sensor. If the user doesn’t know what “normal impact” is or where to start, the programmer has the ability to put the sensor in “learn mode” where the programmer will read the...

カタログの4ページ目を開く

PHDのすべてのカタログと技術パンフレット

1. 

   Pneumatic Workholding Clamps

   12 ページ

2. 

   SERIES 5360 PROXIMITY SWITCHES

   6 ページ

3. 

   EGRK Heavy duty PARALLEL ELECTRIC GRIPPER

   11 ページ

4. 

   Series 8600

   6 ページ

5. 

   A, HV, AV series

   64 ページ

6. 

   Series GRM

   96 ページ

7. 

   BCK Stretching Cylinder

   12 ページ

8. 

   RCC series

   6 ページ

9. 

   GRW series

   8 ページ

10. 

    GRS series

    10 ページ

11. 

    PA series

    8 ページ

12. 

    Series CTS Cylinders

    10 ページ

13. 

    BCZ series

    12 ページ

14. 

    PB & PC series

    16 ページ

15. 

    Adaptors, Transition Plates & Stanchions

    46 ページ

16. 

    1750 series

    3 ページ

17. 

    SCV series

    10 ページ

18. 

    1000-8000 Series

    38 ページ

19. 

    PHD Productivity Solutions Catalog Introduction

    15 ページ

20. 

    Multi-Motion Actuators

    36 ページ

21. 

    190/191 series

    10 ページ

22. 

    Series LC Escapements

    6 ページ

23. 

    Series 160 Escapements

    8 ページ

24. 

    CRS series

    14 ページ

25. 

    Clamp Image Brochure-

    4 ページ

26. 

    BCS series

    16 ページ

27. 

    PHD Plus Electric Linear Solutions - PHDPLUS02

    48 ページ

28. 

    PHD Unlimited Unique Solutions? Weld Cylinder Catalog

    24 ページ

29. 

    Main Catalog

    644 ページ

カタログアーカイブ

1. 

   CLAMPS

   156 ページ