カタログ >
Panasonic Robot & Welding system solutions >
Power Choke Coil

Power Choke Coil
1 / 19ページ

カタログの抜粋

Power Inductors Panasonic INDUSTRY High heat resistance and high reliability using metal composite core (MC) Industrial Property : patents 21 (Registered 2/Pending 19) • High heat resistance : Operation up to 150 °C including self-heating • High-reliability : High vibration resistance as result of newly developed integral construction; under severe reliability conditions of automotive and other strenuous applications • High bias current : Excellent inductance stability using ferrous alloy magnetic material (Fig.1) •Temp. stability : Excellent inductance stability over broad temp. range (Fig.1) • Low audible (buzz) noise : A gapless structure achieved with metal composite core • High efficiency : Low DC resistance of winding and low eddy-current loss of the core • Shielded construction •AEC-Q200 compliant • RoHS compliant • Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability • Boost-Converter, Buck-Converter DC/DC Product Code Classification Height Winding Inductance Core Suffix Size Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.

カタログの1ページ目を開く

Power Inductors 1. Series PCC-M0530M/PCC-M0540M (ETQP3M□□□YFP/ETQP4M□□□YFP) Standard Parts *1: Measured at 100 kHz *2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5 *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 52 K/W measured on 5.5×5.0×3.0 mm case size and approx. 48 K/W measured on 5.5×5.0×4.0 mm case size. See also (✽5) *4: Saturation rated...

カタログの2ページ目を開く

Power Inductors Performance Characteristics (Reference 2) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2 PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3 ［ ETQP3M3R3YFP ］ Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us

カタログの3ページ目を開く

Power Inductors 2. Series PCC-M0630M/PCC-M0645M (ETQP3M□□□YFN/ETQP4M□□□YFN) Standard Parts *1: Measured at 100 kHz *2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5 *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 44 K/W measured on 6.5×6.0×3.0 mm case size and approx. 37 K/W measured on 6.5×6.0×4.5 mm case size. See also (✽5) *4: Saturation rated...

カタログの4ページ目を開く

Power Inductors Performance Characteristics (Reference 2) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2 PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, ple

カタログの5ページ目を開く

Power Inductors 3. Series PCC-M0754M/PCC-M750M (ETQP5M□□□YFM/ETQP5M□□□YGM) Standard Parts *1: Measured at 100 kHz *2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5 *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant is approx. 31 K/W measured on 7.5×7.0×5.4 mm　case size and approx.　 29 K/W measured on 7.5×7.0×5.0 mm case size. See also (✽5) *4: Saturation rated current...

カタログの6ページ目を開く

Power Inductors Performance Characteristics (Reference 2) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2 PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3 ［ ETQP5M4R7YFM ］ Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, ple

カタログの7ページ目を開く

Power Inductors 4. Series PCC-M0854M/PCC-M0850M (ETQP5M□□□YFK/ETQP5M□□□YGK) Standard Parts *1: Measured at 100 kHz *2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5 *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 8.5×8.0×5.4 mm case size and approx. 29 K/W measured on 8.5×8.0×5.0 mm case size. See also (✽5) *4: Saturation rated...

カタログの8ページ目を開く

Power Inductors Performance Characteristics (Reference 2) ● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2 PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sur

カタログの9ページ目を開く

Power Inductors 5. Series PCC-M1054M/PCC-M1050M (ETQP5M□□□YFC/ETQP5M□□□YGC) Standard Parts *1: Measured at 100 kHz *2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5 *3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.7×10.0×5.4 mm case size and approx. 26 K/W measured on 10.7×10.0×5.0 mm case size. See also (✽5) *4: Saturation rated...

カタログの10ページ目を開く