NPM-WX/NPM-WXS
1 / 4ページ

カタログの抜粋

Machine configuration Layout 1 Rear camera Electronics Assembly System Supply unit layout 8 mm taping：120 Tray ： 0 Modular Placement Machine Mounting head Front camera Single-lane mode Batch mounting：L 50 mm × W 50 mm ∼ L 750 mm × W 610 mm 2 position mounting：L 50 mm × W 50 mm ∼ L 350 mm × W 610 mm PCB Dual transfer Batch） 50 mm × W 50 mm ∼ L 750 mm × W 300 mm Dual transfer position） L50 mm × W 50 mm ∼ L 350 mm × W 300 mm （：L （2 ： dimensions Dual-lane mode （： Single transfer Batch） 50 mm × W 50 mm ∼ L 750 mm × W 590 mm Single transfer 2 position） L50 mm × W 50 mm ∼ L 350 mm × W 590 mm （：L Electric source Pneumatic source 2 740 kg （Only for main body:This differs depending on the option configuration.） 2 660kg （Only for main body:This differs depending on the option configuration.） Placement head 1 head on each side (front, rear) Taping Component supply Stick Tray Placement head Max. speed 1 head (rear camera is optional) Tape：4 ∼ 56 / 72 / 88 / 104 mm Front rear 17-slot feeder cart specifications: Max. 136 product types (4, 8 mm tape) Front rear 17-slot feeder cart specifications: Max. 32 product types (single stick feeder) Front rear 17-slot feeder cart specifications: Max. 16 product types*5 (single stick feeder) One side tray specifications：Max.24、Front-rear tray specifications：Max.48 Lightweight 16-nozzle head V2（ Per head ） Lightweight 8-nozzle head（ Per head ） 4-nozzle head（ Per head ）（0.084 s / chip） 43 000 cph 3-nozzle head V2（ Per head ） 9 400 cph （0.383 s / chip） 7 300 cph （0.493 s / QFP feeder） 6 350 cph （0.567 s / QFP tray）*9 Placement accuracy Cpk≧1） ±25 μm/ chip （ ±25 μm/ chip ±40 μm/QFP ±25 μm/QFP Component dimensions (mm) 0201 chip *6 *7 / 03015 chip *6 0402 chip *6 ∼ L 6 × W 6 × T 3 0402 chip *6 ∼ L 45 × W 45 × T 12 or 0603 chip ∼ L 120 × W 90 × T 40 or 0603 chip ∼ L 120 × W 90 × T 40 or L 100 × W 40 × T 12 L 150 × W 25 × T 40 L 150 × W 25 × T 40 * Placement tact time and accuracy values may *1: Only for main body differ slightly depending on conditions. *2: 2 010 mm in width if extension conveyors (300 mm) are placed *Please refer to the specification booklet for details. on both sides. *3: Dimension D including feeder cart *4: Excluding the monitor, signal tower and ceiling fan cover. *5: Stick feeders cannot be used on the rear feeder cart of NPM-WXS. *6: 0201/03015/0402 component requires a specific nozzle/tape feeder. *7: 0201 component placement is optional. (Under conditions specified by Panasonic) *8: For any QFP □20 mm or less in size *9: For any QFP □28 mm or less in size Safety Cautions ●Please read the User's Manual carefully to familiarize yourself with safe and effective usage procedures. ● To ensure safety when using this equipment, all work should be performed according to that as stated in the supplied Operating Instructions. Read your operating instruction manual thoroughly. Panasonic Group products are built with the environment in mind. Model Name Please check the homepage for the details. panasonic.com/global/corporate/sustainability Panasonic Corporation Process Automation Business Division 3-1-1 Inazu-cho, Toyonaka City, Osaka 561- 0854, Japan TEL +81-6-6866- 8675 FAX +81-6-6862- 0422 All data as of January 1, 2020 Ver.January 1, 2020 © Panasonic Corporation 2020 *Photograph is NM-EJM9D ●Changes in specifications and appearance m

カタログの1ページ目を開く

Developing high-quality, ［１］ Panasonic's next generation of mounting production (X series) concept “Smart manufacturing” high-throughput unmanned floor ［2］ NPM-WX、WXS's features New platform to realize Smart Manufacturing More line throughput, better quality and lower cost with fully automated mounting system ﬂoor Stable operation based on the autonomic function Labor-saving, improved utilization 3 Reduced work variations Evolved basic performance Maximized actual throughput 2 APC system and automatic recovery option NPM-WX,WXS Floor management system and remote operation option...

カタログの2ページ目を開く

Autonomous line control Concentrated control 2 Maximized actual throughput Taking the concept and compatibility of NPM series Automated items Minimization of human-dependent work Remote operation option NPM−DGS Data Creation System APC system Automatic recovery option Remote operation option Automatic changeover option iLNB PCB information communication function AOI information display option Host communication option Recovery by remote operation is available for the error of which recovery can be made based on human judgment alone. This enables concentrated on-the-floor monitoring,...

カタログの3ページ目を開く

Comprehensive control Changeover ability Automatic changeover option Supporting changeover (production data and rail width adjustment) can minimize time loss using system software Data Creation System ●PCB ID read-in type PCB ID read-in function is selectable from among 3 types of external scanner, head camera or planning form This is a software package that provides integrated management of component library and PCB data, as well as production data that maximizes mounting lines with high-performance and optimization algorithms. Head Camera Planning form Realizes high productivity and...

カタログの4ページ目を開く