NPM-D3A
1 / 2ページ

カタログの抜粋

Electronics Assembly System catalog Production Modular Manufacturing Process Innovation *It may not conform to Machinery Directive and EMC Directive in case of optional configuration and custom-made specification. 種名 Dual-lane mode dimensions *1 Single-lane mode PCB Dual-lane mode exchange Single-lane mode time Electric source Pneumatic source *2 Dimensions *2 Mass PCB 0 s * *No 0s when cycle time is 3.6 s or less 3 .6 s * *When selecting short conveyors 3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA 0.5 MPa、100 L /min（A.N.R.） W 832 mm × D 2 652 mm *3 × H 1 444 mm *4 1 680 kg （Only for main body:This differs depending on the option configuration.） Placement head Max. speed Placement accuracy Cpk≧1）（ Component dimensions （mm） Component Taping supply * Placement tact time,inspection time and accuracy values may differ slightly depending on conditions *Please refer to the specification booklet for details. Lightweight 16-nozzle head V 3 （ Per head ） High production mode[ON] High production mode[OFF] 46 000 cph （0.078 s/ chip ） ± 3 7 μ m / chip 0402 chip *6 ∼ L 6 × W 6 × T 3 38 000 cph（0.095 s/ chip ）（± 25 μm / chip *5 ） ± 30 μm / chip 03015 *6 *7 /0402 chip *6 ∼ L 6 × W 6 × T 3 Tape ：4 / 8 / 12 / 16 mm Max. 68 4、8 mm tape、Small reel）（ *1：Due to a difference in PCB transfer reference, a direct connection with NPM (NM-EJM9B) / NPM-W (NM-EJM2D) /NPM-W2 (NM-EJM7D) dual lane specs cannot be established. *2：Only for main body *3 : Dimension D including feeder cart *4：Excluding the monitor, signal tower and ceiling fan cover. （ *5：±25 μm placement support option. Under conditions specified by Panasonic） *6：The 03015/0402 mm chip requires a specific nozzle/feeder. *7：Support for 03015 mm chip placemen

カタログの1ページ目を開く