カタログ >
Ophir Optronics >
LBS-100 Attenuato

LBS-100 Attenuato
1 / 1ページ

カタログの抜粋

The LBS-100 system that is not as compact as the LBS-300 above but has larger aperture, and has versions for longer wavelengths. The system contains the mounting frame, 1 wedge beam splitter and several attenuators. The exit end of the LBS-100 is standard C mount thread so all our cameras can be mounted to the frame. The wedge angle is 6.5 degrees to insure that the reflection from the rear side will not enter the camera. The optical elements are flat to 1/4 wave in the visible to ensure no distortion of the beam. reducer adaptor The LBS beam splitter/attenuator system can be combined with the4X beam reducer, as shown above, to attenuate and view large Ordering Information Item Wavelength Absorber Neutral Wedge material Max power Clear aperture Dimensions P/N range material Densities or and reflection density on ND transmission filters Neutral density 0.3,0.7,1.0,2.0, Fused Silica 4% in 5W/cm2forno glass 3.0,4.0 NDat wavelength range distortion,50W/ LBS-100 filter set Replacement filter set LBS-100 to Mount LI 1058/L11059 camera to LBS-100 attenuator beam reducer This adapter enables mounting of the LBS-100 beam splitter/attenuator assembly in front of the4X beam reducer. The combined assembly can image large high power beams in one unit. 01.01.2016 _ ' """""I" For latest updates please visit our website: www.ophiropt.com/photonics =QHM»photo***

カタログの1ページ目を開く