カタログ >
Onosokki >
Digital Tachometers/Sensors and Peripherals

Digital Tachometers/Sensors and Peripherals
1 / 28ページ

カタログの抜粋

Digital Tachometers/Sensors and Peripherals - 2

Select the rotation detector/rotation display unit that is optimal for your needs from the wide range of products that Ono Sokki is proud to offer. >

カタログの2ページ目を開く

Digital Tachometers/Sensors and Peripherals - 4

Note 1: Please see Table of Signal CableӔ on Pages 26 and 27 to select the suitable model of signal cable.Note 2: Please contact nearest Ono Sokki representative for the separated catalogue of TM-2100 series and CT-6520. >

カタログの4ページ目を開く

Digital Tachometers/Sensors and Peripherals - 5

Notes on Detection Gears Electromagnetic Type (External Gear Type) [Modules 1 to 3] > Line Speed Detector (Roller Encoder) Length Meter Peripheral Devices Frequency-Voltage converters Magnetoelectric Type (External Gear Type) Electromagnetic Type (Internal Gear Type) Photoelectric Type Rotary Encoders >

カタログの5ページ目を開く

Digital Tachometers/Sensors and Peripherals - 6

Shape of a Detection Gear > Shape of the gear for the MP-981 and the mounting method >

カタログの6ページ目を開く

Digital Tachometers/Sensors and Peripherals - 7

> Features Օ > Standard Detection Gear Note:When using the MP Series electromagnetic rotation detectors in locations where there are requirements for high reliability, please contact nearest Ono Sokki representative for separate technical solutions that meet your needs. size="-2">

カタログの7ページ目を開く

Digital Tachometers/Sensors and Peripherals - 8

*1 The temperature coefficient for the DC resistance value is 0.4% / հ C.*2 Load resistance is 10 k , M =1, Gap =0.5 mm*3 The frequency value (Hz) indicated corresponds to the rotating speed (r/min) indicated when a 60 P/R detection gear is used. *4 When using the Ono Sokki standard MP-001 detection gear*5 JIS E 4031, five types, 40 Hz, two hours in each of the X and Y directions; four hours in the Z direction*6 Three times each in the X, Y and Z directions ֖֖ ֖ >

カタログの8ページ目を開く

Digital Tachometers/Sensors and Peripherals - 9

Note: When a 60-tooth gear is used Note: The data in the above tables are standard values, and operation at these values is not guaranteed. An Ono Sokki display unit was used to be available at the above figures. >

カタログの9ページ目を開く

Digital Tachometers/Sensors and Peripherals - 12

For detection of low-to-medium speeds > Features Օ > Specifications Acid-resistant, waterproof type > Features Օ > Specifications CAUTION The MP-981 and AP-981 have been designed for the purpose of detecting rotational speed.Please observe the following points when using these detectors.(1) Output is performed from ultra-low to high speeds (1 to 20,000 r/min [in the case of a 60-tooth gear]) as rectangular waves with the same amplitude, but this does not necessarily mean that the High level will be at the peaks of the gear and the Low level at the valleys. Accordingly, when using several...

カタログの12ページ目を開く

Digital Tachometers/Sensors and Peripherals - 13

Features > *Manufactured after receipt of order

カタログの13ページ目を開く

Digital Tachometers/Sensors and Peripherals - 14

For measurement over a wide range > Features Օ > Specifications Note: Please refer to p.25 for the coupling used. Compact, Optical Fiber Sensor > Features Օ > Specifications R R size="-4">

カタログの14ページ目を開く

Digital Tachometers/Sensors and Peripherals - 15

Compact model designed for the long-distance detection of visible light > Features Օ > Specifications *Ono Sokki Model HT-011 is recommended as reflective mark. > Application Example Optical Fiber Sensor/Optical Multimeter Օ > Features > Specifications * TMF-80 swivel-neck model with magnetic base* The optical fiber can be extended up to a length of 10 m. (option) * Reflective mark Model HT-011 can be supplied as an option. 1 set of HT-011 includes 250 pcs. of reflective mark. size="-4">

カタログの15ページ目を開く

Digital Tachometers/Sensors and Peripherals - 16

Specifications > Note:Ono Sokki handles a wide range of rotary encoders, and we have printed a separate catalog for these products. Please ask nearest Ono Sokki representative for a copy of the RP SeriesӔ catalog or download it from the companys web site. size="-1">

カタログの16ページ目を開く

Digital Tachometers/Sensors and Peripherals - 18

Specifications > Note: There is no plug attached to the cable end of the RP-721 device.

カタログの18ページ目を開く

Digital Tachometers/Sensors and Peripherals - 19

System Configuration Example >

カタログの19ページ目を開く

Digital Tachometers/Sensors and Peripherals - 25

Note 1The permissible eccentricity and angle of deviation are within the range that enables guaranteed performance of the coupling. Even though these values are within the permissible range, avoid mounting the coupling in a location where the load on the detector shaft will exceed the stipulated limits.Note 2Hole machining is the responsibility of the user. >

カタログの25ページ目を開く