Omni16C Relay Repeat Output Board
1 / 2ページ

{{requestButtons}}

カタログの抜粋

Omni16C Relay Repeat Output Board - 1

Omni16C Relay Repeat Output Board Model C1425 8 Channel Relay Repeat Board for Omni8C or Omni16C. 8 Channel Relay Output Board 8 Normally Open Contacts Two Part Screw terminals Energisation status configured via Omni8/16C setup Relay Repeat Output Board The Relay Repeat Output board provides an option to the Open Collector outputs usually fitted to Annunciators. This allows the user to wire any type of signal through the relays and allows mixed voltages etc, relay interlocking functions or can simply be potential free for other equipment such as loggers or recorders. The repeat relay output board has 8 channels with a Normally Open contact. The function and energization of this can be set via the programming port of the annunciator, which is particularly useful in interlock applications. These boards can be fitted to Slots E or F of an Omni16C. The Omni-16C is screened with both the relay designation and the ribbon header outputs used by the open collector repeat output module. The relays are rated to 2A 30Vdc or 0.5A 230Vac and are connected to two part detachable terminals which leaves the terminals connected to the wiring while the unit is removed. SPECIFICATIONS Relay Contact Outputs Temperature Range Contact Type Contact Rating Isolation Operating Temperature Humidity Storage Temperature Humidity -10 C – 70 C (+14 F – 158 F) Less than 40% RH recommended 8 Potential Free Normally Open (Form A) 2A 30Vdc or 0.5A 230Vac 1000Vac from contact to other circuits Connections Terminals Type Screw Two Part Detachable Ordering Information Model Number Wire Gauge Repeat Relay Board Terminal Flammability Copyright Omniflex  Subject to change without notice

カタログの1ページ目を開く
Omni16C Relay Repeat Output Board - 2

Omni16C Relay Repeat Output Board Model C1425 8 Channel Relay Repeat Board for Omni8C or Omni16C. 8 REPEAT RELAY OUTPUTS PER BOARD (OPTIONAL) ELECTRICAL CONNECTIONS Repeat Relay Contact opens when Input is in Alarm State (Default Setting) Copyright Omniflex  Subject to change without notice

カタログの2ページ目を開く

Omniflexのすべてのカタログと技術パンフレット

  1. MAXIFLEX Bases

    3 ページ

  2. Model M1711A HSC

    2 ページ

  3. Model M1341B 16DO

    2 ページ

  4. Model M1342A 32DO

    2 ページ

  5. Model M1372A 8RO

    2 ページ

  6. Maxilarm

    15 ページ

  7. Model C2330B-11-0

    6 ページ

  8. Model C2330B-12-0

    6 ページ

  9. Model M1403A 16AI

    2 ページ

  10. Model M1412A 8AO

    2 ページ

  11. C2404B

    4 ページ

  12. C118xB series

    4 ページ

  13. Model M1022B BASE

    3 ページ

  14. Model M1102A PSU

    2 ページ

  15. Model M1023B BASE

    3 ページ

  16. Model M1021B BASE

    3 ページ

  17. Model C2462A OT LPD

    12 ページ

カタログアーカイブ