カタログ >
OMEGA/オメガ >
OS-MINIHUB

OS-MINIHUB
1 / 4ページ

カタログの抜粋

Multi-Channel Infrared Temperature Monitoring System RS485/Modbus® OS-MINIHUB U iniature Non-Contact M Temperature Sensors with RS485 Modbus Communications U Touch Screen Display Optional for Configuration, Display, Alarms and Data Logging U ow-Cost Standalone L 6-Channel System U uild Larger Systems B Using the TSD600’s Separate Modbus Master and Slave Interfaces U nalog and Alarm A Relay Outputs via Optional Modules U onforms to Industrial C EMC Standards The OS-MiniHUB is an industrial infrared temperature monitoring system, with miniature sensing heads and optional display modules. OS-MiniHUB sensors are designed to measure the surface temperature of non-reflective materials in industrial applications, from -20 to 1000°C (-4 to 1832°F). They are sealed to NEMA 4 (IP65), built from 316 stainless steel, and fully tested to industrial EMC standards. They can measure food, paper, thick plastics, asphalt, paint, bulk materials and organic materials, as well as most dirty, rusty or oily surfaces. OS-MiniHUB sensors have an operating temperature rating of up to 120°C (248°F) with no need for cooling. OS-MINIHUB shown smaller than actual size. The sensors measure just 45 mm (1.7") long (plus cable gland), so they can fit into the smallest of spaces. Up to 6 sensors can be connected to the optional TSD600 interface module, which provides temperature display, configuration, and high-capacity data logging to a MicroSD Card. Analog and relay outputs are available via separate DIN rail mounted modules. With up to 6 sensors connected to one TSD600, the OS-MiniHUB is an ideal low-cost non-contact temperature measurement system. To measure more than 6 locations, OS-MiniHUB sensors and TSD600 sub-networks may be connected to an RS485 Modbus SCADA system or PLC. It is possible to measure the temperature of hundreds or thousands of locations on the same network. The OS-MiniHUB may be installed as a new temperature monitoring system, or integrated into an existing Modbus network. With two Modbus interfaces, the TSD600 makes an ideal local display for a group of sensors as part of a larger system. 1 The OS-MINIHUB-JB6 junction box makes it easy to connect the system together. Never miss a critical temperature event. In condition monitoring applications, the OS-MiniHUB system is an always-on solution that can replace manual checks with a handheld thermometer or expensive thermal imager. Typical Applications Curing Ovens Fiberglass impregnated with epoxy is cured in an oven to increase strength. OS-MiniHUB sensors are placed inside the oven at up to 120°C (248°F), to build-up a temperature profile at many points on the entire surface of the workpiece, and to communicate the measured temperature to the heating system that controls the hot air blowers in the oven. Industries include boatbuilding and aerospace as well as many others. Industrial Bakeries Check the temperature profile of bakery products at multiple points along a conveyor oven. Corrugated Board Manufacturing Monitor the web temperature along an entire corrugator, with local displays for each section of the production line, and centralized monitoring in the control room. Sensors withstand 120°C (248°F), and can be used in hightemperature areas such as single facers withou

カタログの1ページ目を開く

TSD600 touchTSD600 display screen with data display touch screenlogging with data logging OS-MINIHUB-RM12 OS-MINIHUB-AO4 Up to 6 relay output analog output OS-MINIHUB sensors OS-MINIHUB-RM12 OS-MINIHUB-AO4 Up to 6 module module relay output analog output OS-MINIHUB sensors (optional)* (optional)* Power module module supply (optional)* (optional)* Power supply OS-MINIHUB-JB6 (optional)* OS-MINIHUB-JB6 (optional)* Modbus PLC or SCADAPLC Modbus system (optional)* or SCADA system (optional)* *Up to 6 output modules may be connected modules may *Up to 6 output to each TSD600 be connected to each...

カタログの2ページ目を開く

TSD600 6-Channel Touch Screen Terminal U onfigure, Display and Log C Data and Alarms from Up to 6 Sensors per Terminal Unit, Simultaneously or Individually U perates as Modbus® O Master and Modbus Slave U igh Capacity Data Logging H to MicroSD Card U right Touch Screen with B Backlight U nalog and Relay Outputs A via Optional ICP DAS Modules U -Channel Scrolling 2 Temperature Chart Specifications Temperature Range: -20 to 1000°C (-4 to 1832°F) Interface: RS485 Modbus RTU Accuracy: ±1% of reading or ±1ºC whichever is greater Repeatability: ±0.5% of reading or ±0.5ºC whichever is greater...

カタログの3ページ目を開く

OS-MINIHUB shown smaller than actual size. Sensor head with 2:1 divergent optics, 1 m (3.3') cable Sensor head with 20:1 divergent optics, 1 m (3.3') cable 12-channel relay output module 4-channel voltage or current analog output module Fixed mounting bracket (1-axis) Adjustable mounting bracket (2-axis) Laser sighting tool (including laser) Dual laser continuous laser sighting bracket fixed (1-axis) Dual laser continuous laser sighting bracket adjustable (2-axis) 6-channel touch screen display module (10 to 30 Vdc) 6-channel touch screen display (240 Vac) MicroSD card for TSD600 data...

カタログの4ページ目を開く