カタログ >
OMEGA/オメガ >
Humidity & Temperature Controllers CNiTH and DPiTH Series

Humidity & Temperature Controllers CNiTH and DPiTH Series
1 / 3ページ

カタログの抜粋

Humidity & Temperature Controllers CNiTH and DPiTH Series - 1

M-15 www.omega.co.uk +44 (0)161 777 6611 The NEWPORT® iTH Series instruments monitor and control both temperature and relative humidity. All meters and controllers in the series are high-quality, highly accurate instruments featuring Newport’s award-winning iSeries technology, uncompromising standards, and excellent quality, backed by an extended 5-year warranty. The instruments are simple to configure and use, while providing tremendous versatility and a wealth of powerful features. Dual Loop Control Humidity + Temperature High Accuracy: ±0.5°C and ±2% RH 4 Popular DIN Sizes Ethernet and Serial Communications (optional) 2 Control or Alarm Outputs (optional) Choice of Relays, SSR, DC Pulse, Analogue Voltage, and Current RH/Temperature Probe Included Full Autotune PID Control Programmable Ramp and Soak for Humidity and/or Temperature IP65 Front Bezel The NEWPORT iTH Series instruments are available either as monitors or controllers. The monitors are extremely accurate, programmable digital panel meters displaying humidity, temperature, or dew point. The controllers also provide dual loop control for both humidity and temperature and are easily programmed for any control or alarming requirement from simple on-off to full autotune PID control. The iTH family of meters and controllers is available in four true DIN sizes with IP65 splash-resistant bezels: the ultra compact 1/32 DIN (the world’s smallest dual loop humidity and temperature controller); the popular midsize 1/16 DIN square bezel with dual display; the 1/8 DIN vertical; and the 1/8 DIN horizontal with big bright 21 mm digits. The NEWPORT iTH Series LED displays can be programmed to change colour between green, amber, and red at any setpoint or alarm point. The iTH controller models offer a choice of two control or alarm outputs in almost any combination: solid state relays (SSR); form "C" SPDT (single pole double throw) relays; pulsed 10 Vdc output for use with an external SSR; or analogue output selectable for control or retransmission of the process value. The networking and communications options (highly recommended) include direct Ethernet LAN connectivity with an SPECIFICATIONS Control Action: Reverse (heat) or direct (cool) Modes: Time and Amplitude Proportional Control Modes; selectable Manual or Auto PID, Proportional, Proportional with Integral, Proportional with Derivative with Anti-Reset Windup and ON/OFF Rate: 0 to 399.9 seconds Reset: 0 to 3999 seconds Cycle Time: 1 to 199 seconds; set to 0 for ON/OFF operation Gain: 0.5 to 100% of span; setpoints 1 or 2 Damping: 0000 to 0008 Soak: 00.00 to 99.59 (HH:MM), or OFF Ramp to Setpoint: 00.00 to 99.59 (HH:MM), or OFF Auto Tune: Operator initiated from front panel for one input at a time only Control Output 1 & 2 Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID, Ramp and Soak Output 1: SPDT type, can be configured as Alarm 1 output. Output 2: SPDT type, can be configured as Alarm 2 output embedded Web server, and serial communications. The C24 serial commu-communications option includes both RS232 and RS485. Protocols include both MODBUS and a straightforward ASCII protocol. The C4EI option includes Ethernet and RS485 ASCII/MODBUS in one device. The iTH Series meters and controllers are designed for easy integration with popular industrial automation, data acquisition, and control programs as well as Microsoft Visual Basic and Excel. NEWPORT® provides free configuration and data acquisition software and demos, which make it fast and easy to get up and Humidity + Temperature Controllers with 2 control outputs £328 £261 Monitor ®

カタログの1ページ目を開く

Humidity & Temperature Controllers CNiTH and DPiTH Series - 2

www.omega.co.uk +44 (0)161 777 6611 M-16 16.0 DIA 21.1 SQ 137 3M CABLE 92H x 45W 96H x 48W x 127D 16.0 DIA 0.9 CABLE 21.1 SQ 48H x 96W x 127D 45H x 92W 51 96.00 48.00 Resolution: 0.03%,12 bit for RH; 0.01°C, 14 bit for Temperature Response Time: 4 sec for RH; 5 sec for Temp (63% slowly moving air) *Note: Extended temperature range is for probe only; the unit’s operating temperature is 0 to 50°C Network and Serial Communications Supported Protocols: TCP/IP, ARP, HTTPGET RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu. Programmable 300 to 19.2 K...

カタログの2ページ目を開く

Humidity & Temperature Controllers CNiTH and DPiTH Series - 3

Freephone 0800 488 488 | International +44(0) 161 777 6622 | Fax +44(0) 161 777 6622 | Sales@omega.co.uk www.omega.co.uk More than 100,000 Products Available! CANADA www.omega.ca Laval(Quebec) 1-800-TC-OMEGA UNITED KINGDOM www. omega.co.uk Manchester, England 0800-488-488 GERMANY www.omega.de Deckenpfronn, Germany 0800-8266342 FRANCE www.omega.fr 088-466-342 BENELUX www.omega.nl 0800-099-33-44 UNITED STATES www.omega.com 1-800-TC-OMEGA Stamford, CT. CZECH REPUBLIC www.omegaeng.cz Karviná, Czech Republic 596-311-899 Temperature Calibrators, Connectors, General Test and Measurement...

カタログの3ページ目を開く