カタログ >
OMEGA/オメガ >
ECONOMICAL LIQUID TURBINE FLOW METERS

ECONOMICAL LIQUID TURBINE FLOW METERS
1 / 2ページ

カタログの抜粋

ECONOMICAL LIQUID TURBINE FLOW METERS - 1

ECONOMICAL LIQUID TURBINE FLOW METERS FTB-1300 Series Optional U 1% of Actual Flow Accuracy ± U ressure Rating Up P to 345 bar (5000 psi) U tainless Steel S Construction with Tungsten Carbide Bearing U asy Maintenance Design E The FTB-1300 Series of turbine flow meters are designed for industrial and laboratory measurement of water, solvents and other low viscosity fluids. The FTB-1300 Series turbine flow meters feature a 316 stainless steel body and a tungsten carbide bearing. They offer good accuracy and reliability with very little pressure drop. The standard turbine flow meters feature threaded end connections. The FTB-1300 series of turbine flow meters is designed with a wear resistant rotor assembly to provide trouble free operation and a long service life. Fluid moving through the flow meter causes the rotor to turn at a speed proportional to the flow rate, and as the rotor blades cut through the magnetic field of the pickup, an electronic pulse is generated. The pulse train is used to represent the actual flow or total amount of fluid passing through the flow meter. The number of electronic pulses generated per unit volume is known as a K-factor. The value is constant over each flow meter’s operating range, and is unique to each meter. FTB-1302, 1.1 to 11 LPM flow meter, shown smaller than actual size. Outputs Square Wave (FTB-1300 Models): Supply Voltage: 10 to 28 Vdc Supply Current: 8 mA @ 12 Vdc, 12 mA @ 24 Vdc Duty Signal: 50% ±15% Minimum Signal: 0.5 Hz Frequency Output: Flow dependent, up to 2000 Hz Driving Capacity: 50 mA Max resistive load Output Impedance: ~ 40 Ω, analog switch and self-resetting fuse Temperature Range: -40 to 85°C (-40 to 185°F) Cable Length: 60 cm (24") Supply Voltage: 10 to 30 Vdc Input: 0.25 Hz to 5 KHz Update Time: 1/F + 25 msec Amplitude: 1V p-p to 40V p-p Linearity: ±0.01% of reading Output: 4 to 20 mA Enclosure Certifications: NEC Class I Groups C, D; Class II Groups E, F, G (FTB-1310 Series) Temperature Range: -40 to 85°C (-40 to 185°F) Accuracy: ±1% reading Pressure Max: 345 bar (5000 psi) Wetted Materials: Stainless Steel (316L, 303 and 1.4122) and carbide with nickel binder (be sure that the operating fluid is compatible with these materials) FTB-1300 Series turbine pressure drop with water, 1cP at 20°C (68

カタログの1ページ目を開く

ECONOMICAL LIQUID TURBINE FLOW METERS - 2

Turbine Dimensions Cable Length: 60 cm (24") FTB-1300 models with square wave output. FTB-1313, with 4 to 20 mA transmitter (standard) on FTB-1310 Series. Shown smaller than actual size. * 4 to 20 mA output adds 168 mm (6.6") to the E dimensions for protection head. Amplified square wave, 60 cm (24") cable 4 to 20 mA industrial head electronics enclosure (FTB-1310-CONNECTOR recommended) Recommended for use with FTB-1311 through FTB-1318 6-digit rate or total display Comes complete with operator’s manual and certificate. Certificate has no points and is not NIST. For a 5-point NIST...

カタログの2ページ目を開く