カタログ >
OMEGA/オメガ >
The “All-in-One” Surface Thermocouple

The “All-in-One” Surface Thermocouple
1 / 2ページ

カタログの抜粋

The “All-in-One” Surface Thermocouple - 1

The “All-in-One” Surface Thermocouple Fiberglass-Insulated Thermocouple Wire Leads High or Low Temperatures! U tocked in 1, 2, and 3 m S (40, 80, and 120") Lengths U ustom Lead Lengths C Available U vailable in J, K, T, and A E Calibrations U tripped Leads Standard S (Molded Miniature Connector with Integral Strain Relief Optional) U asy-to-Install SiliconeE Based, Self-Adhesive Backing [Rated to 260°C (500°F)] U ensor Rated to 315°C S (600°F) When Used as a “Cement-On” (OMEGABOND® Air Set Cements Available— Place Sensor and Encapsulate with OMEGABOND® Air Set Cement) OMEGA introduces the next generation of our surface-mount fast-response thermocouples. The SA1XL thermocouple achieves response times of less than Super-Fast Response All the Time! Quick Deli on Custom very Le Wire Length ad s SA1XL-K-SRTC with mini connector, shown actual size. Optional S ta Steel Overb inless ra Extra Prote id for ction Bare sensing element nominal, 0.001" thick. 30 AWG fiberglass lead wire rated to 482°C (900°F). 0.15 seconds. This thermocouple is constructed using a Polyimide/ fiberglass-junction insulation along with a fiberglass-insulated lead wire. The SA1XL can be used as a self-adhering thermocouple for temperatures up to 260°C (500°F) or it can be cemented in place for use at temperatures up to 315°C (600°F). Specifications Dimensions: Patch Length: 25.4 mm (1.0”) Patch Width: 9.5 mm (0.375”) Strip Length: 25.4 mm (1.0”) with 12.7 mm (0.5”) bare wire AVAILABLE FROM STOCK I

カタログの1ページ目を開く

The “All-in-One” Surface Thermocouple - 2

The self-adhesive mounting strip is ideal for “targeted” placement of the sensor element. Once the element is in place, it can be used “as is”, for applications such as electronic component temperature monitoring during board fabrication. It can also be cemented in place using OMEGABOND® for higher temperatures. OMEGABOND®, see accessory chart or visit omega.com for additional information. Accessories Model No. Description OB-100-16 OMEGABOND® 100 1 lb kit, fast-setting, 2-part epoxy (sets in 8 to 12 min.) OB-200-16 OMEGABOND® 200 1 lb kit, high temperature, 2-part epoxy OB-400 OMEGABOND®...

カタログの2ページ目を開く