カタログ >
OMEGA/オメガ >
Advanced Design Surface-Mount Thermistor Sensor

Advanced Design Surface-Mount Thermistor Sensor
1 / 1ページ

カタログの抜粋

Advanced Design Surface-Mount Thermistor Sensor - 1

Advanced Design Surface-Mount Thermistor Sensor “Stick-On” or “Cement-On” to Target Device 19 mm (0.75") SA1-TH-44004-40-T shown actual size. U vailable in 5 Standard A Resistance Values U elf-Adhesive Design Can be Easily S Applied to Flat and Curved Surfaces U ensor Can be Removed S and Re-Applied U nterchangeability of ±0.2°C Standard I (±0.1°C Optional) U perating Range of -80 to 120°C O (-112 to 248°F) Standard [-80 to 75°C (-112 to 167°F) Optional] U m (40") of 26 AWG Stranded PFA 1 Insulated and Jacketed Cable with Stripped Leads Standard U ptional Phone Plug Connector O Notes: For additional cable length, add required length to end of the model number for additional cost. For a phone plug, add “-PP” to the model number for an additional cost. For tighter interchangeability, substitute the thermistor model number from the table below and add the cost adder to the sensor cost. Optional over braiding is available, add “-SB” to the end of the model number, per meter or foot, for an additional cost. Ordering Examples: SA1-TH-44004-40-T-PP, surface mount thermistor sensor with a resistance of 2252 Ω at 25°C, interchangeability of ±0.2°C, 1 m (40") of PFA insulated and jacketed cable and a phone plug connector. SA1-TH-44034-80-T-PP, surface mount thermistor sensor with a resistance of 5000 Ω at 25°C, interchangeability of ±0.1°C, 2 m (80") of PFA insulated and jacketed cable and a phone plug connector. Storage and Working Temp for Best Stability -80 to 75°C (-110 to 165°F) -80 to 75°C (-110 to 165°F)

カタログの1ページ目を開く