
カタログの抜粋

Control Unit for Wind Speed and Direction – USB Mass Storage DATA LOGGING ANTC-IDV32 is a high performance control station for professional wind speed and direction data loggings. It is used mainly for analysis of pre-installed wind turbines and wind flows MONITORING chemically hazardous environments. It comes standard with USB stick to the' data storage and security of a fixed Eprom on board that works in the case of full or faulty stick. The log is made as regards the speed and angle of direction stored in degrees per second. On the key to a text file is compiled every 24 hours, indicating the date of the day acquisation. Since a file .TXT, can be treated by any calculation program after appropriate consideration and / or analyzed with the software of our own design: WIND ANALYSIS. SET NORD and start/stop DATA LOGGING pushbuttons The Central-ANTC IDV32 doesn't need PC to be installed in the field, because once you set the current date and time stored and maintained by lithium backup battery (operation usually carried out prior to shipping), simply insert the key into the slot and, using the 2 buttons to the board, press to set the NORTH and then press to start and / or stop the running log. A practical green LED flashes to tell you if the log is written or not. 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it
カタログの1ページ目を開く
Power supply 12 Vdc Current consumption 95 mA St.By - 145 mA with D. LOG. active and inserted USB stick Mounting on DIN rail base with attacks Overall dimensions 113 x 82 x 47 mm 1 digital input frequency dedicated for anemometer 1 analog input voltage dedicated anemoscope 1 SPI port for communication to MODEM 1 USB type A for key input 1 USB type B port for PC connection 1 secure memory, 8 MB EPROM 1 memory stick 2 GB included Red LED power 3 color LED GREEN / BLUE / RED flashing logger active on USB DATA LOGGER / EPROM or ANOMALIES Warnings Accessories Standard accessories 2 Gb USB mass...
カタログの2ページ目を開く
Container Outdoor pin container with transparent door and terminal compartment for convenient connections Software ANEMOSTAT 2010 software include on ANTC-IDV32 supply. It is a excellent tool for viewing real-time wind speed and direction, programming the data logger and download data Eprom. WIND ANALYSIS (www.analisideiventi.it) is a software designed to process analysis and design activities on the wind. Through charts accurate and complete, simple and intuitive, are represented flows of wind, depending on the direction and speed, with a simulation of the wind rose, recreated in different...
カタログの3ページ目を開くNUOVA CEVA Automationのすべてのカタログと技術パンフレット
-
ANEMO4403 | HZ
2 ページ
-
ANTC-V1
4 ページ
-
WM44-EVO11 V3
2 ページ
-
ANEMOSCOPE ANTC_D2.2
2 ページ
-
Winch Cranes
1 ページ
-
Derrick Cranes
1 ページ
-
Gantry Cranes
1 ページ
-
Head Cranes
1 ページ
-
Tower Cranes
1 ページ
-
ANTC-V2.2
4 ページ
-
PME type slip rings
2 ページ
-
SAG105WR-5142-2SC
5 ページ
-
ANEMO4H25 Heated
2 ページ
-
ARES Series
2 ページ
-
Large L15- Large L99
1 ページ
-
Small S3- Small S6
1 ページ
-
Saga V6
3 ページ
-
SAGA-L Series
4 ページ
-
SAGA-LB Series
4 ページ
-
PMP type slip rings
2 ページ
-
PMS type slip rings
2 ページ
-
PRM type slip rings
1 ページ
-
WAVE series
2 ページ
-
ZEUS series
2 ページ
-
ANTC-D1
3 ページ
-
Wind Analysis
3 ページ
-
WM44-P control unit
5 ページ
-
ANTC-09
3 ページ
-
PZG type slip rings
2 ページ
-
PSP type slip rings
1 ページ
-
PRS type slip rings
2 ページ
-
PRP type slip rings
2 ページ
-
SAG105WR
4 ページ
-
WV4403
3 ページ
-
WM44-DRM
4 ページ
-
antc-idv
2 ページ