カタログ >
NODKA Automation Technology >
ICP69XXX-C Series Datasheet

ICP69XXX-C Series Datasheet
1 / 24ページ

カタログの抜粋

Support ARM mounting from TOP side or BOTTOM side Fanless and anodized aluminum Customer-specific requests for button units, up to 6x Ø22 buttons 1x power switch and 1x 2in1 USB 2.0 port at the back side ◼ Specification Product Name Touch screen Power Consumption Resolution ratio White Luminance MTBF (hour) Contrast Ratio Viewing Angle Swing ARM mounting (Support NODKA 4460 square tube and Rittal CP 40) Default: 1x Emergency button, 1x selection button, 1x red push button, 1x green push button, 1x Key switch 2 x Intel 1000Mbps Ethernet ， Max 4 x Intel 1000Mbps Ethernet Serial ports Touch screen type Capacitive Touch screen Communication interface Windows 7, Windows 10 IoT，Ubuntu, CentOS, Input Voltage 12-24VDC ±10% , Support reverse connection protection, over voltage protection, over current protection 1x 2-pins Phoenix Connector for DC power(internal); 1x Power button with light at the back of housing Idle Power Consumption Operating Temperature Storage Temperature SSD applied: 1.5 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hr/axis Operating 10G peak acceleration (11ms duration), follow IEC 60068-2-27 All product specifications are subject to change without notice

カタログの1ページ目を開く

Power Button A: 2*RS232/485 B: 4*USB3.0 C: HDMI D: 4*LAN E: Power button F: HDD/Power LEDs G: DC-in

カタログの2ページ目を開く

1.Fully configurable according to customer specifications 2.Frontally accessible for subsequent configuration changes and/or additions 3.Hard-wired connection mode 4.The number of elements that can be installed depends on the size of the display 5.Technical Supports：www.nodka.com Memory Storage Note: If the system provides some optional parts, additional certification of system compatibility may be required in some regions/countries, please contact NODKA for system compatibility.

カタログの3ページ目を開く