カタログ >
NKK Switches >
KP Series RGB Expansion

KP Series RGB Expansion
1 / 8ページ

カタログの抜粋

Miniature Audio/Video 4-Pin RGB Pushbuttons Distinctive Characteristics KP series offers a complete switch solution for all broadcast panel needs, including the newest line of RGB LED options with four terminals. Distinct, long total travel of .177” (4.5mm) for KP01 or shorter stroke of .138” (3.5mm) for KP02. The super bright RGB LED provides vibrant full color spectrum in unlimited color combinations. Unique actuation guide gives positive indication of circuit transfer as well as smooth and silent operation. Choices of tactile, nontactile or tactile/audible actuation. Compact design with...

カタログの3ページ目を開く

Miniature Audio/Video 4-Pin RGB Pushbuttons TYPICAL SWITCH Pole & Circuit 15A SPST Black only ( ) = Momentary Normally Open Contacts Travel & Force Contacts & Terminals Gold Contacts and Straight PC Terminals; 100mA @ 12V DC Stroke: 4.5mm (.177”) Actuation Force: 1.9N Stroke: 3.5mm (.138”) Actuation Force: 1.6N DESCRIPTION FOR TYPICAL ORDERING EXAMPLE KP0115ANBKG03RGBP-2SJB 11.6mm Plunger and 15.0mm Sculptured Cap Clear Lens and White Diffuser SPST OFF-Momentary ON Circuit Normally Open Contacts Straight PC Terminals Super Bright RGB LED Nontactile Actuation Black Housing Gold Contacts with...

カタログの4ページ目を開く

ORDERING EXAMPLE Cap Types Flat JB JB Cap Colors Clear Lens & White Diffuser POLE & CIRCUIT Black only CONTACTS, TERMINALS, & RATING Gold Contacts 9.2mm Plunger is designed with a narrower neck to hold the 12.0mm Cap. 11.6mm Plunger is designed with a wider neck to hold both the 15.0mm and 17.4mm Caps.

カタログの5ページ目を開く

Miniature Audio/Video 4-Pin RGB Pushbuttons CAP TYPES & COLORS Lens & Diffuser Colors Available: Clear Lens White Diffuser Materials & Finishes: Lens - Polycarbonate with glossy finish Diffuser - Polycarbonate with textured finish Optional Protective Guard AT4170 available; contact factory. RGB LED SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. LEDs are an integral part of the switch and not available separately. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast...

カタログの6ページ目を開く

Miniature Audio/Video 4-Pin RGB Pushbuttons TYPICAL SWITCH DIMENSIONS Terminal Detail Terminal Detail Terminal Detail ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS ATTENTION ELECTROSTATIC SENSITIVE DEVICES As shown in the accompanying illustration, the cap and plunger are designed with tabs and notches to assure proper orientation of the cap on the switch. Tab Step Plunger Notches Removal of Cap Assembly & Separation of Lens & Diffuser Holding the switch tightly, pull the cap off the switch. Once the cap assembly is released from the plunger, the lens and diffuser can be separated. Pry up the lens...

カタログの7ページ目を開く

Miniature Audio/Video 4-Pin RGB Pushbuttons LEGENDS NKK Switches can provide custom legends for caps. Contact factory for more information. Suggested Printable Areas for KP Lens Lens Recommended Methods: Printing on Diffuser is not advisable. Laser Etch on clear lens, Screen Print on flat lens. Laser Print on film insert. Epoxy based ink is recommended. Film Insert Diffuser Shaded areas are suggested printable areas for Lens. Sculptured Cap Lens Suggested Printable Areas for KP Film Insert Shaded areas are suggested printable areas for Film Insert. Sculptured or Home Key Cap Film Inserts...

カタログの8ページ目を開く