カタログ >
NIVELCO Process Control Co. >
NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK

NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK
1 / 5ページ

カタログの抜粋

NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK - 1

FOR BULK SOLIDS AND LIQUIDS RF-CAPACITANCE LEVEL SWITCHES LEVEL SWITCHES

NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK - 2

NIVOCAP RF-CAPACITANCE LEVEL SWITCHES APPLICATIONS GENERAL DESCRIPTION The NIVOCAP CK-100 series new generation capacitance level switches unlike the traditional capacitive principle they operate as capacitance meters in the RF (radio-frequency) range. The most advantageous feature of this technique is that the instrument has great build-up immunity, therefore the NIVOCAP CK-100 is an excellent choice for those adhering, sticky substances where the rival vibrating or the other contacting measurement technologies are not applicable. The mechanical construction consists of a stainless steel...

カタログの2ページ目を開く

NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK - 3

TECHNICAL DATA

カタログの3ページ目を開く

NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK - 4

The probe should be protected against strong material inflow by appropriate selection of the mounting position or by using an overhead protective shield. When the capacitance level switch is mounted on the side of the tank, coning or arching of the material should be taken into consideration. In dusty mediums the inclination of the side mounted probe should be greater than the angle of repose, to prevent too big amount of powder deposition on the probe that might cause false switching. Also avoid mounting the unit near to the filling entry or near to medium accumulation. In case of tanks...

カタログの4ページ目を開く

NIVELCO LEVEL SWITCHES - RF–CAPACITANCE - NIVOCAP CK - 5

OPERATION Power supply Fail-Safe Status Enter into calibration Calibration under progress High or Low ORDER CODES (not all combinations available) NIVOCAP RF-capacitance level switches NIVOCAP C (1) (!) The order code of an Ex version should end in "Ex" (2) The maximal probe length is 1.5 m in case of W” connection (3) High temperature version in not available (4) Under approval Power supply / Output / Ex NIVELCO PROCESS CONTROL CO. H- 1 043 BUDAPEST, DUGONICS U. 11. TEL.: (36-1) 889-0100 ■ FAX: (36-1) 889-0200 E-mail: sales@nivelco.com http://www.nivelco.com

カタログの5ページ目を開く