VLF series
1 / 16ページ

カタログの抜粋

VACUUM ACCESSORIES Vacuum Blow-off Control Valve equipped with Blow-off Air & Pressure adjusting needles Add-on Blow-off Controller Vacuum Pad Vacuum generator Vacuum air Blow-off air Blow-off pressure adjustment needle Add-on Blow off Controller is for Vacuum air vacuum generators with vacuum Blow-off air blow-off function and controls (controlled flow) Blow-off air rate blow-off air while maintaining adjustment needle characteristics of vacuum Blow-off pressure adjustment needle generators. ● Blow-off pressure control Blow-off flow control Blow-off air rate adjustment needle Newly added pressure Add-on Blow off Controller control function prevents work-pieces from being blown off. ● Relief function releases unnecessary air and shortens blow-off response time by attaching Add-on Blow-off Controller near Vacuum Pad. Blow-off air Vacuum Pad ※”Blow-off air” is for releasing work-piece from vacuum pad. Prevent work-piece from being blown-off Tiny and light work-piece Rotatable body and fitting make it easy to connect or disconnect tube in any direction. Add-on Blow-off Controller Vacuum Filter Free Holder Fall Prevention Valve 8mm LED Pressure Sensor LED Pressure Sensor Small Sensor Pressure Sensor Wit

カタログの1ページ目を開く

Vacuum Accessories Series VACUUM ACCESSORIES EXTERNAL VACUUM VACUUM CONTROLLER GENERATOR Add-on Blow-oﬀ Controller ■ Model Designation (Example) VLF Add-on Blow-oﬀ Controller ① VR port size (Vacuum generator side) ② W port size (Work-piece side) ① VR port size (Vacuum generator side) 4 ø4mm Code Port size ② W port size (Work-piece side) Push-In Fitting Joint type Code Port size Taper pipe thread 01 R1/8 ■ Speciﬁcations Fluid medium Operating pressure range Setting range of relief valve operating pressure Operating vacuum pressure 751 Small Vacuum Regulator Add-on Blow-off Controller...

カタログの2ページ目を開く

■ How to insert and disconnect 1. How to insert and disconnect tubes (Push-In Fitting) ① Tube insertion Insert a tube into Push-In Fitting up to the tube end. Lock-claws bite the tube and fix it automatically, then the elastic sleeve seals around the tube. Refer to “2. Instructions for Tube Insertion” under “Common Safety Instructions for Fittings” . ② Tube disconnection Make sure to stop air supply before the tube disconnection. VACUUM ACCESSORIES The tube is disconnected by pushing release-ring to release Lock-claws. 2. How to tighten thread Tighten the hexagonal-column with a proper tool...

カタログの3ページ目を開く

Vacuum Accessories Series ■ Characteristics Flow rate characteristics of blow-off air 25 Setting pressure of vacuum generator：0.7MPa Blow-off air rate：60l/min[ANR] Flow rate (l/min[ANR]) VACUUM ACCESSORIES EXTERNAL VACUUM VACUUM CONTROLLER GENERATOR Add-on Blow-off Controller Setting pressure of vacuum generator：0.5MPa Blow-off air rate：47l/min[ANR] 15 Setting pressure of vacuum generator：0.3MPa Blow-off air rate：30l/min[ANR] Number of rotations of Blow-off air rate adjustment needle Pressure characteristics of brow-off air (Pressure supply: 0.5MPa, Tube length: 100mm) 0.025 Small Vacuum...

カタログの4ページ目を開く

Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” on page 35-39 and “Common Safety Instructions for Vacuum Series” on page 47-49. Warning 1. Since Add-on Blow-off Controller has an installing direction, please read the catalog thoroughly and confirm before using it. There is a possibility of personal injury or product damage by installing the product in a wrong way. 2. Only air can be used as a fluid medium. Contact us when any other fluid is used. 3. Avoid an excessive tensile force, twisting force, bending,...

カタログの5ページ目を開く

Vacuum Accessories Series VLF VR port (Vacuum generator side): Push-In Fitting / W port Relief port VR port Blow-off pressure adjustment needle Blow-off air rate adjustment needle VACUUM ACCESSORIES Weight CAD (g) file name VLF VR port (Vacuum generator side): Push-In Fitting / compliant Blow-off air rate adjustment needle Add-on Blow-off Controller Blow-off pressure adjustment needle Weight CAD (g) file name Chart Characteristic chart page Relief port Small Vacuum Regulator W port (Work-piece side): Taper Pipe Thread W port (Work-piece side): Push-In Fitting EXTERNAL VACUUM VACUUM...

カタログの6ページ目を開く

■ How to adjust Add-on Blow-off Controller 1. Connect VR port with vacuum generator side and W port with work-piece side. Fully open the blow-off pressure adjustment needle ① and fully close the for blow-off air rate adjustment needle ② . 2. Start the operation of vacuum generator and gradually close the needle ① to adjust the required vacuum condition. Make sure there is no vacuum startup delay. Repeat generating vacuum several times to check the operation goes smoothly. 3. Open the needle ② gradually to supply the proper blow-off air rate. VR port (Vacuum generator side) ② Blow-off air...

カタログの7ページ目を開く

Vacuum Accessories Series VACUUM ACCESSORIES EXTERNAL VACUUM VACUUM CONTROLLER GENERATOR Add-on Blow-off Controller 757 Small Vacuum Regulator Add-on Blow-off Controller

カタログの8ページ目を開く

Safety Instructions SAFETY Instructions 　This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. 　Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous...

カタログの9ページ目を開く

http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper...

カタログの10ページ目を開く

VLF series 1 / 16ページ

カタログの抜粋

NIHON PISCO CO.のすべてのカタログと技術パンフレット

VLF series
1 / 16ページ