cad

VK series
1 / 53ページ

{{requestButtons}}

カタログの抜粋

VK series - 1

Complex Vacuum Generator with Variety of Mounting Units for Diversified Applications Vacuum Generator of the most suitable module for your application is possible by the modularized each unit and rich combination of units. Plug ④Mechanical vacuum switch ⑤Vacuum switch with LED display ⑥Air timer type blow-off valve ⑦Blow-off solenoid valve ②Ejector ③Suction solenoid valve Combinations ① Filter + ② Ejector ③ Suction solenoid valve Check valve (vacuum retention function) ④ Mechanical vacuum switch ⑤ Vacuum switch with LED display ⑥ Air timer type blow-off valve ⑦ Blow-off solenoid valve

カタログの1ページ目を開く
VK series - 2

Vacuum Generator Series Vacuum Generator VK ■ Characteristics Mechanism can be selectable from solenoid valve type and air timer (air chamber) type. The built-in switching valve realizes fine tuning of quick blow-off air and fine adjustment of air rate. maintenance by a lock-on manual button. vacuum sensor selections: LED display Type and Mechanical Type which is simple and user-friendly. LED display is used for LED digital pressure sensor to enhance visibility. types of vacuum switch : 2 switch output, 1 switch output with 1 analog output are available depending on the desired application....

カタログの2ページ目を開く
VK series - 3

■ Piping Example ① Filter Dusts sucked up from a vacuum pad are filtered and blocked from entering inside the vacuum generator. ② Blow-off air rate adjustment needle Turning the release needle to right (clockwise direction) reduces blowoff air and turning it to left (counterclockwise) increases blow-off air. ③ Vacuum Filter Dusts and water drops exhausted from the vacuum generator are filtered. ④ Filter / Regulator Select a filter and a regulator which ensure an adequate flow pressure and rate of VK. ⑤ Vacuum Sensor with LED display Easy adjustment of vacuum level by the LED display. 2...

カタログの3ページ目を開く
VK series - 4

Vacuum Generator VK ■ Model Designation (Example) VK Complex Vacuum Generator ⑪ Vacuum switch ⑩ Number of stations ⑨ Body color ⑧ Solenoid valve type ⑦ Exhaust port ⑥ Air supply port ① Port orientation Code Code Code A B Stand-alone type with double side port Stand-alone type with single side port M Manifold type ② Vacuum characteristics Code High-vacuum type Rated supply pressure 72.5 psi (0.5MPa) Large-flow type Rated supply pressure 72.5 psi (0.5MPa) High-vacuum at low air supply pressure type Rated supply pressure 50 psi (0.35MPa) Manifold-base alone ③ Nozzle bore. (Combinations: A, C,...

カタログの4ページ目を開く
VK series - 5

④ Combinations (18 types) Code Filter Suction solenoid valve Check valve (vacuum retention feature) Mechanical vacuum switch Vacuum switch with LED display Air timer type blow-off valve Solenoid valve type blow-off pilot valve No code ⑤ Vacuum port (tube dia.) ■ Stand-alone type ※ 5/32" (code: 5/32) and ø4mm (code: 04) is selectable for Nozzle Bore 0.5mm and 0.7mm only. ■ Manifold type (VKM) inch size Port position Side (Straight) Top (Straight) Code S5/32 S1/4 S5/16 PP T5/32 T1/4 T5/16 Tube dia. ø5/32 ø1/4 ø5/16 Plug ø5/32 ø1/4 ø5/16 00:Applicable to a manifold installation top-mounting...

カタログの5ページ目を開く
VK series - 6

⑦ Exhaust port (tube dia.) ■ Stand-alone type Silencer vent ø8mm Straight type 8mm is same as 5/16" (tube exhaust) ø8mm Elbow type 8mm is same as 5/16" (tube exhaust) inch size Silencer vent Port type c R side only S1 o Both sides S2 d e L side only S3 Tube dia. – mm size Silencer vent Port type c R side only S1 o Both sides S2 d e L side only S3 Tube dia.(mm) – 00:Applicable to a manifold installation top-mounting unit alone. ⑧ Solenoid valve type Voltage Normally closed (N.C.) Normally open (N.O.) No code:Manifold-base alone ※ The above codes are selectable when a suction solenoid valve...

カタログの6ページ目を開く
VK series - 7

Vacuum Generator Series Vacuum Generator VK ■ Model Designation of Block Plate (Example) VKM ② Color ① Block plate Manifold for complex vacuum generator ① Block plate:MB ② Color W Light-gray Code Color ■ Model Designation of Nozzle Set (Example) VK Complex vacuum generator ① Complex vacuum generator Code H Vacuum characteristics High-vacuum type Rated supply pressure 72.5 psi (0.5MPa) Vacuum characteristics Large-flow type Rated supply pressure 72.5 psi (0.5MPa) ※ E type does not have Nozzle Bore 0.5mm. ② Nozzle bore Code Nozzle bore Vacuum characteristics High-vacuum at low air supply...

カタログの7ページ目を開く
VK series - 8

■ Order Example ■ Manifold type (VKM) .When all stations have common specifications. ① Port orientation:M → Manifold ② Vacuum characteristics:H → H igh-vacuum type ③ Nozzle bore:10 → ø1.0mm ④ Combinations:W → Filter, Suction solenoid valve, Vacuum switch with LED display and Blow-off solenoid valve ⑤ Vacuum port:T6 → ø6mm Push-In Fitting on top ⑥ Air supply port:20 → ø10mm Push-In Fittings on both sides of manifold ⑦ Exhaust port:S2 → Silencers on both sides of manifold ⑧ Solenoid valve type:E → Normally closed (N.C) type 24VDC ⑨ Color:B → Black ⑩ Number of stations :04 → 4 stations ⑪ Switch...

カタログの8ページ目を開く
VK series - 9

Vacuum Generator Series Vacuum Generator VK ■ Order Exampl ■ Manifold-base only (Block plate not attaching to the top unit) Example . When all vacuum ports are common specifications VK M – S1/4 43/8 61/2 – W 08 ⑤ ① Port orientation:M → Manifold type ⑤ Vacuum port:S1/4 → ø1/4" Push-In Fitting for each of 8 stations ⑥ Air supply port :4 3/8 → R side only, ø3/8" Push-In Fitting (Elbow) ⑦ Exhaust port:6 1/2 → L side only, ø1/2" Push-In Fitting (Elbow) ⑨ Color:W → Light-gray ⑩ Number of stations :08 → 8 stations .When the vacuum ports differ even by one (Fill out the Specification Order Form on...

カタログの9ページ目を開く
VK series - 10

of model code when manifold installation top-mounting units and vacuum port vary in type, while stations of the manifold type (VKM) are aligned ( ❶ and ❷ are examples of model designation. Also fill in ❸ (Specification Order Form) which indicates station arrangements for manifold installation top-mounting unit and vacuum port.) ❶ Model code and number of units when ordering manifold VK M – 00 48 62 – W 08 ・ ・ ・ ・ ・ ・ ・ only 1 unit ※ See the Specification Order Form Example 3 for manifold only ❷ Model code and number of units of manifold installation top-mounting units 1)…VK M H 07 G – 00 00 00...

カタログの10ページ目を開く

NIHON PISCO CO.のすべてのカタログと技術パンフレット

  1. CTB series

    1 ページ

  2. FUS8 series

    3 ページ

  3. 31 & 32 Series

    20 ページ

  4. VP series

    106 ページ

  5. CHA series

    8 ページ

  6. Gripper Series

    15 ページ

  7. SVB Series

    50 ページ

  8. SVA series

    13 ページ

  9. SVR series

    31 ページ

  10. NSB series

    8 ページ

  11. BV series

    8 ページ

  12. HV series

    5 ページ

  13. Plarailchain SC

    15 ページ

  14. Plarailchain SPO

    12 ページ

  15. Plarailchain SP

    14 ページ

  16. HPO

    12 ページ

  17. HPU

    12 ページ

  18. PJN series

    15 ページ

  19. KJNC series

    15 ページ

  20. SSJS series

    6 ページ

  21. Stainless SUS316

    13 ページ

  22. UE series

    12 ページ

  23. FB series

    1 ページ

  24. CTA series

    1 ページ

  25. SFTN series

    2 ページ

  26. SET series

    1 ページ

  27. SFT series

    14 ページ

  28. ULF series

    12 ページ

  29. UCQ series

    2 ページ

  30. UQ series

    12 ページ

  31. NB series

    12 ページ

  32. NA series

    12 ページ

  33. UD series

    12 ページ

  34. UBS series

    12 ページ

  35. UBT series

    12 ページ

  36. UC series

    1 ページ

  37. UB series

    12 ページ

  38. AK/AS series

    26 ページ

  39. NK series

    18 ページ

  40. Brass Series

    30 ページ

  41. V-0 series

    27 ページ

  42. EG Series

    27 ページ

  43. PP Fitting series

    12 ページ

  44. PP Series

    26 ページ

  45. AP series

    18 ページ

  46. SL series

    16 ページ

  47. P-SUS series

    33 ページ

  48. NS series

    24 ページ

  49. SSP series

    8 ページ

  50. ATS series

    6 ページ

  51. Air Filter

    20 ページ

  52. SFU series

    9 ページ

  53. JP series

    15 ページ

  54. ET series

    11 ページ

  55. EQ series

    19 ページ

  56. CVLU series

    21 ページ

  57. CV series

    24 ページ

  58. JN series

    25 ページ

  59. JSD series

    10 ページ

  60. JS Low-Flow series

    17 ページ

  61. JSC series

    13 ページ

  62. JS series

    30 ページ

  63. MA series

    16 ページ

  64. RH series

    16 ページ

  65. R series

    16 ページ

  66. PS series

    16 ページ

  67. L series

    41 ページ

  68. FUS20

    7 ページ

  69. GP series

    13 ページ

  70. VUS12 series

    2 ページ

  71. VUS21 series

    14 ページ

  72. VUS8-S series

    22 ページ

  73. JSD series

    10 ページ

  74. JK series

    10 ページ

  75. RVFUP series

    6 ページ

  76. VLF series

    16 ページ

  77. VFL series

    8 ページ

  78. VF series

    22 ページ

  79. ECV series

    8 ページ

  80. VPLFC, VPLFD series

    17 ページ

  81. VPKE series

    4 ページ

  82. RPV06 Series

    8 ページ

  83. VZ Series

    34 ページ

  84. VX Series

    42 ページ

  85. VQ Series

    4 ページ

  86. VN Series

    40 ページ

  87. VJ Series

    34 ページ

  88. VG series

    21 ページ

  89. VRL series

    17 ページ

  90. VVV series

    11 ページ

  91. VLS series

    4 ページ

  92. VM | VC series

    28 ページ

  93. VY series

    24 ページ

  94. VB series

    11 ページ

  95. VH | VS series

    28 ページ

  96. VPHMP series

    12 ページ

  97. VYR series

    5 ページ

  98. HS series

    13 ページ

  99. HML series

    14 ページ

  100. VRG series

    18 ページ

  101. Dry Unit Series

    33 ページ

  102. VLM series

    12 ページ

  103. VSPE series

    5 ページ

  104. VT series

    21 ページ

  105. PB series

    13 ページ

  106. JSG series

    17 ページ

  107. pararel

    3 ページ

  108. fitting

    4 ページ

  109. BJSU series

    4 ページ

  110. SC

    15 ページ

  111. SPO

    12 ページ

  112. SP

    13 ページ

  113. RPV pump

    8 ページ

  114. Pre-set

    6 ページ

  115. Flange

    13 ページ

  116. HML

    14 ページ

  117. VYR

    5 ページ

  118. VPLFC

    17 ページ

  119. SVB

    172 ページ

  120. SVR

    39 ページ

  121. 8mm Sensor

    22 ページ

  122. Vacuum Filter

    28 ページ

  123. Fall Prevention

    18 ページ

  124. Vacuum Pen

    21 ページ

  125. Push-Rod Release

    4 ページ

  126. cylinder

    22 ページ

  127. FDAbellows

    6 ページ

  128. Oval

    80 ページ

  129. sponge

    50 ページ

  130. mark-free

    34 ページ

  131. flat

    42 ページ

  132. Ultrathin

    34 ページ

  133. packaging bag

    13 ページ

  134. multi-bellow

    46 ページ

  135. bellows pad

    74 ページ

  136. Skid proof pad

    42 ページ

  137. soft bellow pad

    60 ページ

  138. soft pad

    66 ページ

  139. VRL

    17 ページ

  140. VH VS VC VUM VU VY VB

    336 ページ

  141. VZ

    34 ページ

  142. VX

    42 ページ

  143. VVV

    11 ページ

  144. VQ

    42 ページ

  145. VN

    40 ページ

  146. VLS

    4 ページ

  147. VLM

    12 ページ

  148. VK

    53 ページ

  149. VJ

    34 ページ

  150. VG

    21 ページ

  151. Vacuum Tube

    12 ページ

  152. Twin Coiling

    12 ページ

  153. Tube Cutter

    12 ページ

  154. Polyurethane Tube

    12 ページ

  155. Nylon Tube Series

    12 ページ

  156. Insert Ring

    12 ページ

  157. UL series

    12 ページ

  158. Anti-spatter Tube

    12 ページ

  159. K series

    30 ページ

  160. Stop Fitting Series

    16 ページ

  161. Rotary Joint Series

    16 ページ

  162. Main Block Series

    24 ページ

  163. Connector Series

    16 ページ

  164. Color Cap

    12 ページ

  165. Vacuum EOAT Kit HML

    14 ページ

  166. Vacduum gripper

    18 ページ

  167. SSNC series

    13 ページ

  168. SJSC series

    24 ページ

  169. KJSC series

    17 ページ

  170. Silencer Series

    13 ページ

  171. Check Valve

    4 ページ

  172. Parallel Gripper

    6 ページ

  173. JSG

    17 ページ

  174. GENERAL

    106 ページ

  175. Ball Valve Series

    19 ページ

  176. Hand Valve Series

    15 ページ

  177. Change Valve

    11 ページ

  178. SVA21 Series

    21 ページ

  179. P Series

    71 ページ

  180. SVA20 Series

    43 ページ

  181. RegulatorPL031821m

    12 ページ

  182. BJSU series

    6 ページ

  183. NP68-01e

    17 ページ