SVA series
1 / 13ページ

カタログの抜粋

Push-In Fitting Incorporated Type Solenoid Valve Solenoid Valve Sectional Area 18mm 2 (Cv 0.97) with valve width 16mm (5/8" ) ● Various Valve Selections selections of piping direction: (Top and Side) color selection: Black and Light Gray ● Twin 3-Port Solenoid Valve (3-way valve) enables to control 2 actuators separately with one unit. Vacuum-operatable 2 / 3-Port Solenoid Valve ● Vacuum-operatable 2 or 3-way valve which does not require external and Double solenoid type

カタログの1ページ目を開く

■ Model Designation of SVA21 Single Valve type (Example) SVA Resin Solenoid Valve 21 Series (valve width: 5/8" (16mm)) ① Output Port Size ⑥ Valve Coil Voltage ④ Valve Type ③ Exhaust Port ② Inlet Port Size ① Output Port Size, ② Inlet Port Size (*) Fitting Type Push-In Fitting (inch) Piping Direction * When the silencer exhaust is selected, the inlet port piping option is only "Side" (straight fitting). ③ Exhaust Port Fitting Type Push-In Fitting (inch) Silencer (Open-Air Exhaust) * Piping direction of exhaust ports are the same style as the inlet port. If you choose "Top" direction of inlet...

カタログの2ページ目を開く

SOLENOID VALVE Series Solenoid Valve ■ Model Designation of Mounting Unit (Example) SVA Resin Solenoid Valve 21 Series (valve width: 5/8" (16mm)) ② Valve Coil Voltage ① Valve Type Code Position Valve Function Single Solenoid Valve Function Closed Center Double Solenoid Exhaust Center 4(A).2(B).Normally Closed (Twin 3-way valve) Pressure Center 4(A).2(B).Normally Open (Twin 3-way valve) Single Solenoid (Vacuum-operatable valve) Double Solenoid (Vacuum-operatable valve) Single Solenoid (Vacuum-operatable valve) Double Solenoid (Vacuum-operatable valve) ② Valve Coil Voltage D24：DC24V

カタログの3ページ目を開く

■ Sub-Base Specifications Fluid Medium Operating Pressure Range Pressure Resistance Operating Temp. Range Installing Direction No. Mountable Main Valve 4(A).2(B) port Wiring Method Push-In Fitting Individual Plug-in Connector 3 pins Standard equipment only with open-air exhaust (5(R1) and 3(R2) Port). *1. Refer to “Warning” in “Detailed Safety Instructions”. ■ Solenoid Valve Specifications (DC24V) Model SVA 21S-D24 SVA 21D-D24 SVA 21A-D24 SVA 21E-D24 SVA 21T-D24 SVA 21U-D24 SVA 21V-D24 SVA 21W-D24 SVA 21R-D24 SVA 21F-D24 SVA 21P-D24 SVA 21G-D24 Item Direct Acting Valve Valve Stracture...

カタログの4ページ目を開く

SOLENOID VALVE Series Solenoid Valve ■ Solenoid Valve Specifications (AC100V) Model SVA 21S-100 SVA 21D-100 SVA 21A-100 SVA 21E-100 SVA 21T-100 SVA 21U-100 SVA 21V-100 SVA 21W-100 SVA 21R-100 SVA 21F-100 SVA 21P-100 SVA 21G-100 Item Direct Acting Valve Valve Stracture Elastic Seal, Poppet Valve Rated Coil Voltage Pilot Valve Tolerance of Voltage Range Power Consumption Surge Protection Circuit Manual Operation Non-Lock Push Button Operating Pressure Range Valve Type Pneumatic Operation by Pilot Valve Valve Stracture Number of Position Elastic Seal, Spool Valve 2-Position Valve Function...

カタログの5ページ目を開く

5(R1).3(R2)with Check Valve (*1) S (*4) 5(R1).3(R2)without Check Valve (*1) S (*4) *1. The value of .5(R1) and 3(R2) port are those of Open-air Exhaust. *2. 2(B) to 4(A) piping is applied to valve type T / U / V / W. *3. C: Sonic Conductance C(dm3/(s-bar) *4. S: Effective Sectional Area S(mm2(CV)) ■ Cylinder Speed Table Cylinder Speed (m/s) Cylinder Tube bore (mm) φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ100 φ125 φ140 100 200 300 400 500 600 700 800 Note) ● The average speed of the cylinder represents a reference value where the pressure is 0.5MPa (72psi), the load factor is 30% and the piping...

カタログの6ページ目を開く

SOLENOID VALVE Series Solenoid Valve ■ Construction Refer to SVA20 Series. ■ Electric Circuit ●Individual Plug-in Connector for DC24V ●Individual Plug-in Connector for AC100V (Red) ＋V Note) The color in the parenthesis is lead wire color. (～) Blue ■ Weight List Valve Type SVA 21S SVA 21D SVA 21E SVA 21F SVA 21G SVA 21H SVA 21A Silencer Unit Weight (g) Port φ 6mm 28 Port φ 8mm 22.5 Portφ10mm 27 ■ Use the following formula to calculate the weight of SVA21. Sub-Base + (Cartridge Fitting x Qty) + Silencer Unit + Valve Type Example SVA 21 - 0C0C S - S B - D24 ① 52.5 ＋ 38 ＋ 27 ＋ 129 ＝ 246.5g ①...

カタログの7ページ目を開く

Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” and “Common Safety Instructions for Solenoid Valve Series”. 1. When a solenoid valve is operated under a vibration of 49m/s2 or less, install a spool valve at a right angle to the vibrating direction. * Refer to “4. Installation” in “Precautions for Use”. 1. Do not use a 3-position valve for middle-position stop of the cylinder that requires accuracy. Compressiveness of air does not achieve accuracy in stop position. Also, the valve permits leakage, so that...

カタログの8ページ目を開く

SOLENOID VALVE Series Solenoid Valve ■ Standard Size List Type Fitting Type Double Solenoid Output port Push-In Fitting Valve 4(A) (Straight Type / Elbow Tube Exhaust 2(B) Type) Inlet port Push-In Fitting 1(P) Exhaust port (Straight Type / Elbow 5(R1) Type) 3(R2) Type Fitting Type Double Solenoid Output port Push-In Fitting Valve 4(A) (Straight Type / Elbow Open-air Exhaust 2(B) Type) Push-In Fitting (Straight Type / Elbow Type) Fitting Type Single Solenoid Output port Push-In Fitting Valve 4(A) (Straight Type / Elbow Tube Exhaust 2(B) Type) Inlet port Push-In Fitting 1(P) Exhaust port...

カタログの9ページ目を開く

■ Tube Exhaust SVA Double Solenoid Valve Tube Exhaust 2-ø4.5 Screw Hole Push-Lock Manual Button Push-Lock Manual Button Model Code SVA Single Solenoid Valve Tube Exhaust Push-Lock Manual Button

カタログの10ページ目を開く

SOLENOID VALVE Series Solenoid Valve ■ Open-air Exhaust SVA Double Solenoid Valve Open-air Exhaust (Silencer Exhaust) 13.5 2-ø4.5 Screw Hole Push-Lock Manual Button Push-Lock Manual Button Exhaust Window Model Code SVA Single Solenoid Valve Open-air Exhaust (Silencer Exhaust) 13.5 Exhaust Window Push-Lock Manual Button

カタログの11ページ目を開く

■ Dimension of Fitting Part Unit：mm Piping Direction: Top Outlet ports - 4(A)・2(B) Port, Outlet ports - 4(A)・2(B) Port, Inlet/Exhaust ports - 1(P)・5(R1)・ Inlet/Exhaust ports - 1(P)・5(R1)・ 3(R2) Port (Tube Exhaust) 3(R2) Port (Tube Exhaust) Inlet port - 1(P) Port and Silencer (Open-air Exhaust) Piping Direction: Side ■ Replacement of Silencer Element To replace silencer element for 21 series with openair exhaust, loose the installing screws of the element cover with a proper Phillips head screwdriver, and take out the cover for the replacement. Model Designation Adapted Model SVA21 (Open-air...

カタログの12ページ目を開く

SVA series 1 / 13ページ

カタログの抜粋

NIHON PISCO CO.のすべてのカタログと技術パンフレット

SVA series
1 / 13ページ