SFU series
1 / 9ページ

カタログの抜粋

2.5"~3" length compact In-Line Filter Positive-Negative Pressure 5 Micron Copper alloy free Available the same usability with vacuum filter “VFU Series” and usable with positive pressure. ● Suitable as pre-filter in positive pressure system. can be replaced without any tool, easy maintenance Pressure Union Filter of Copper alloy free specification is available for the field requiring "No copper alloy" and "Low level ozone res

カタログの1ページ目を開く

Positive-Negative Pressure In-Line Filter ■ Model Designation (Example) SFU Positive-Negative Pressure In-Line Filter Code Filter Area ② IN & OUT Tube Dia. Inch tubing O.D. (inch) Applied Filter Size ③ Holder No Code：With Holder -NH：With No Holder ④ Material Option No Code：Standard specification -S3：Copper alloy free specification ⑤ Speciﬁcations Type Fluid Medium Vacuum Operating Pressure Pressure Resistance Filtering Accuracy Operating Temp. Range Filter Area °F 20℃). When the product is used in other temperature range, *1. Max. operating pressure represents the value at refer to “Chart...

カタログの2ページ目を開く

■ Construction O-ring ( ① NBR) ( ② HNBR) Lock Claws (Stainless Steel) Release Ring (POM) Fixed Cover (PBT) Filter Element (PVF) Filter Housing (PCTG) Guide Ring ( ① Nickel-plated brass) ( ② Special stainless steel *) * Corrosion resistance equivalent to SUS303 Inlet Cover (PBT) with fitting ① Standard specification ② Copper alloy free specification. Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” and Common Safety Instructions for In-line Filter”. Warning 1. Implement periodic maintenances for the ﬁlter element....

カタログの3ページ目を開く

Positive-Negative Pressure In-Line Filter Caution 1. When installing the filter, make sure the direction of arrow marked on it matches the flow direction of the fluid. Otherwise, the speciﬁed performance cannot be attained. 2. Make sure that the housing is properly locked with the inlet cover and there is no leak whenever dust is removed from the housing and/or the element is replaced. 3. When used in a circuit where the vacuum and the blow off air is alternately applied, be aware there is a possibility the dust captured by the filter element back flows. 4. Make sure that the O-ring is not...

カタログの4ページ目を開く

SFU Positive-Negative Pressure In-Line Filter M3 countersunk screw mounting hole Copper alloy free Selectable Model Code Unit：mm Filter Area Weight Y (cm²) (g) *1. Fill in Code ③ with “NH” for “With No Holder” . *2. Fill in Code ④ with “-S3” for

カタログの5ページ目を開く

Positive-Negative Pressure In-Line Filter SFU Positive-Negative Pressure In-Line Filter - No Holder compliant Copper alloy free Selectable Unit：mm Filtering Area Weight (cm²) (g) *1. Fill in Code ④ with “-S3” for “Copper alloy free specification” . *2. CAD file name is th

カタログの6ページ目を開く

SFU Positive-Negative Pressure In-Line Filter M3 countersunk screw mounting hole Copper alloy free Selectable Tubing O.D. Model Code B øD SFU1-44 ③④ SFU1-66 ③④ SFU2-44 ③④ SFU2-66 ③④ SFU3-66 ③④ SFU3-88 ③④ SFU3-1010③④ Unit：mm Filter Area Weight Y (cm²) (g) *1. Fill in Code ③ with “NH” for “With No Holder” . *2. Fill in Code ④ with “-S3” for

カタログの7ページ目を開く

Positive-Negative Pressure In-Line Filter SFU Positive-Negative Pressure In-Line Filter - No Holder compliant Copper alloy free Selectable Unit：mm Model Code SFU1-44 -NH④ SFU1-66 -NH④ SFU2-44 -NH④ SFU2-66 -NH④ SFU3-66 -NH④ SFU3-88 -NH④ SFU3-1010-NH④ *1. Fill in Code ④ with “-S3” for “Copper alloy free specification” . *2. CAD file name is the same as the model code. Filtering Area Weight (cm²) (g)

カタログの8ページ目を開く

Pressure Drop Amount (MPa) Pressure Drop Amount (MPa) Pressure Drop Amount (MPa) Pressure Drop Amount (MPa) Pressure Drop Amount (MPa) Pressure Drop Amount (MPa) Pressure Drop Amount (MPa) ■ Chart of Pressure Loss Characteristics ■ Replacement of Filter Element ① Release the residual pressure inside the ﬁlter and make the inside pressure at the atmospheric pressure level. ② Unlock the red slide lock by moving it to the opposite direction of the lock arrow mark. ③ Turn the ﬁtting part 180° counteclockwise. ④ Take off the ﬁtting part from the ﬁlter cover and replace elements. ⑤ Remove dust...

カタログの9ページ目を開く

SFU series 1 / 9ページ

カタログの抜粋

NIHON PISCO CO.のすべてのカタログと技術パンフレット

SFU series
1 / 9ページ