SFT series
1 / 14ページ

カタログの抜粋

TUBE MAKE-TO-ORDER PRODUCTS Tube for Environment Prone to Corrosion Fluororesin (PFA) Tube Chemical Industry Medical Industry Medicine Industry Food Industry in Medicine, Heat and Weather Resistance. for Medical, Chemical, Food and Medicine Industries. ● Advanced Smoothness of Tube Inner Surface, Transparency and High Purity. Fluororesin / Polyamide Tube Clean Room Tube Anti-Spatter Tube Anti-Stalic Tube Tube Binder Tube cutter Insert Ring Tube R

カタログの1ページ目を開く

Tube Series Fluororesin (PFA) Tube ■ Model Designation (Example) SFT Fluororesin (PFA) Tube Tube color: C (Transparent) only ② Tube length inch size ② Tube length Code 629 Standard Tube Multi-core Tube Coiling Tube Twin Coiling Tube Fluororesin / Polyamide Tube ■ Speciﬁcations Fluid medium Max. operating pressure (at 20℃ 65%RH) Max. vacuum Operating temp. range Warning ※ 1. Surge pressure must be controlled lower than max. operating pressure when using water or liquid as a fluid medium. ※ 2. Tap water can be used. Consult with PISCO for using other kind of water. ※ 3. Be sure to place...

カタログの2ページ目を開く

■ Burst Pressure Curve (Reference value) 10 9 MAKE-TO-ORDER PRODUCTS Detailed Safety Instructions Before using PISCO products, be sure to read Safety Instructions and Safety Instruction Manual on page 23 to 27 and Common Safety Instructions for Tubes on page 593 to 594. ■ Related Products Insert Ring……P.668 Tube Fitting Stainless SUS316 Series………P.108 Tube Fitting Stainless SUS316 Compression Fitting Series………P.120 Tube Fitting Chemical Series…………P.168 Tube Fitting PP Series………P.178 Speed Controller PP Series………P.412 Throttle (Needle) Valve Stainless SUS316………P.460 Throttle (Needle) Valve...

カタログの3ページ目を開く

Tube Series Fluororesin (PFA) Tube SFT Fluororesin (PFA) Tube compliant Model code Tube length Min. Bending Radius Min. Installation Radius (mm) (mm) (m) 5･20･50･100 ※ . □ in model code: Replaced with Tube length

カタログの4ページ目を開く

※ . Contact us for further information about special tube size above. MAKE-TO-ORDER PRODUCTS Fluororesin / Polyamide Tube Cl

カタログの5ページ目を開く

Tube Series ■ Chemical resistance (SFT tube can be used with the following chemicals at operating temperature 100℃ ) ■ Acid 50% acetic acid Glacial acetic acid Benzoic acid Citric acid Formic acid 50% hydrochloric acid 70% hydrofluoric acid 10% nitric acid 50% nitric acid 100% phenol Phthalic acid 30% phosphoric acid 85% sulfuric acid 98% sulfuric acid Fuming sulfuric acid Benzenesulfonic acid Chlorosulfonic acid 50% chromic acid 10% hydrochloric acid 35% hydrochloric acid 30% hydrofluoric acid Fuming nitric acid Oxalic acid 10% phenol 85% phosphoric acid Succinic acid 50% sulfuric acid 10%...

カタログの6ページ目を開く

Safety Instructions SAFETY Instructions 　This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. 　Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous...

カタログの7ページ目を開く

http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper...

カタログの8ページ目を開く

Safety Instructions SAFETY INSTRUCTION MANUAL PISCO products are designed and manufactured for use in general industrial machines. Be sure to read and follow the instructions below. 1. Do not use PISCO products for the following applications. ① Equipment used for maintaining / handling human life and body. ② Equipment used for moving / transporting human. ③ Equipment specifically used for safety purposes. 1. Do not use PISCO products under the following conditions. ① Beyond the specifications or conditions stated in the catalog, or the instructions. ② Under the direct sunlight or outdoors....

カタログの9ページ目を開く

http://www.pisco.co.jp http://www.pisco.co.jp 1. Remove dusts or drain before piping. They may get into the peripheral machine / facilities and cause malfunction. 2. When inserting an ultra-soft tube into push-in fitting, make sure to place an Insert Ring into the tube edge. There is a risk of causing the escape of tube and a fluid leakage without using an Insert Ring. 3. The product incorporating NBR as seal rubber material has a risk of malfunction caused by ozone crack. Ozone exists in high concentrations in static elimination air, clean-room, and near the high-voltage motors, etc. As a...

カタログの10ページ目を開く

Safety Instructions 7. Instructions for Tube Disconnection ① Make sure there is no air pressure inside of the tube, before disconnecting it. ② Push the release-ring of the push-in fitting evenly and deeply enough to pull out the tube toward oneself. By insufficient pushing of the releasering, the tube may not be pulled out or damaged by scratch, and tube shavings may remain inside of the fitting, which may cause the leakage later. 8. Instructions for Installing a fitting ① When installing a fitting, use proper tools to tighten a hexagonal-column or an inner hexagonal socket. When inserting...

カタログの11ページ目を開く

Tube Series Common Safety Instructions for Tubes Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series as well as the instructions below. Warning 1. Avoid any load on Tubes such as tensile strength, twisting and bending. These may cause the crush, burst and escape of Tubes. 2. Protect Tubes from scratches caused by snagging or kinking. It may cause the burst of Tubes. 3. The burst pressure of Tubes drops as temperature rises. Read the operating pressure in the catalog well, and apply safety factor. 4. The minimum...

カタログの12ページ目を開く

SFT series 1 / 14ページ

カタログの抜粋

NIHON PISCO CO.のすべてのカタログと技術パンフレット

SFT series
1 / 14ページ