multi-bellow
1 / 46ページ

カタログの抜粋

Vacuum pad for food pouch package with uneven surface selection of pad sizes, materials and holder types Pad size：5sizes. Pad material：8types. Holder type：11types. ■ Stroke length of a spring holder is selectable. ・ Conventional long stroke holder (with cover) is integrated into VPC or VPD. Stroke：6, 10, 15 and 20 mm ・ Conventional long stroke holder (without cover) is renewed as VPOC or VPOD. Stroke：20, 30, 40 and 50mm of selections in pad holder for "Copper alloy free" and against "low ozone concentration". -S3 spec.：No copper based metal parts. HNBR or FKM is adopted

カタログの1ページ目を開く

Vacuum Pad Series Vacuum Pad Multi-Bellows Series ■ Selection list Soft-Bellows Soft work-piece such as pouch package with uneven contents Recommended work-piece Nitrile rubber, Silicone rubber, Urethane rubber, Fluoro rubber, Conductive NBR (Low resistance), Food safe NBR (NBR Suited for the food sanitation act. (Japan)), HNBR, EPDM Holder size Holder type Fixed type Spring type Holder without cover is available. Direct mount (Fixed type or Spring t

カタログの2ページ目を開く

■ Model designation of Pad rubber only (Ex.) VP ② .Pad size Code Size(mm) Connection config. code ④ .Pad type Code Type ⑤ .Pad material / Application Code Rubber material Nitrile rubber Silicone rubber Urethane rubber Fluoro rubber NBR Suited for the food sanitation act. (Japan) Application Cardboard Semiconductors Cardboard Chemical Semiconductors Cardboard Taking out Plywood environment Plywood Plywood Iron plate Iron plate molded parts Iron plate High temp. Thin workpieces FoodFoodwork-pieces Food-related related related Other general Other general work-pieces work-pieces Natural (Ivory)...

カタログの3ページ目を開く

Vacuum Pad Series Vacuum Pad Multi-Bellows Series ■ Vacuum Pad dimensions VP10W5 ※ Weight in [ ] is the weight of Fluoro rubber. ■ Drawing of Vacuum Pad and Holder Joint Model code Pad + screw set Bellows Stroke Connection config. code -M4 ※ .5 : Replaced with Pad rubber material code. Refer to page 818 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Bellows stroke are referential values measured based on the following conditions. Pad material : Nitrile rubber. Vacuum level : -80kPa. Lifting direction :...

カタログの4ページ目を開く

Connection config. code：-M4 Pad screw Model code VPM46-69 VPM610-89 VPM612-109 VPM610-159 Material : Nickel-plated brass (In case of metal parts : Standard) Special stainless steel ( austenitic or ferrite) ( In case of metal parts : Copper alloy free material) 　　　 ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ■ Plain washer dimensions Unit：mm Plain washer Model code HW8.4×15.5×1.6 HW8.5×22×1.6 Applicable pad model code VP20~30W5 VP40, 50W5 Material : Electroless nickel-plated steel iron Unit：mm Pad support Model code...

カタログの5ページ目を開く

Vacuum Pad Series Vacuum Pad Multi-Bellows Series ■ Model designation of Holder + Pad (Ex.) VP -6J ⑨ -S3 spec. ⑧ Filter (Option) Vacuum Pad ① Holder type MB B ー Fixed type / Side port Mini Standard No cover Type MD D OD Spring type / Side port ⑦ Free holder or Fall prevention valve (Option) ⑥ Port size and joint type MC C OC Spring type / Top port Mini ー F Standard No cover ー Type Spring type / Direct mount Mini Standard No cover Type Mini Standard No cover Type MA A ー Fixed type / Top port Mini Standard No cover Type ② .Pad size Code Size (mm) Connection config. code ③ .Stroke (No code...

カタログの6ページ目を開く

⑤ .Pad material / Application Code Rubber material Nitrile rubber Silicone rubber Urethane rubber Fluoro rubber NBR Suited for the food sanitation act. (Japan) Application Cardboard Semiconductors Cardboard Chemical Semiconductors Cardboard Taking out Plywood Plywood environment Plywood Iron plate molded parts Iron plate High temp. Iron plate Thin workpieces FoodFoodwork-pieces Food-related related related Other general Other general work-pieces work-pieces Natural (Ivory) Cardboard Plywood Iron plate Food-related Other general work-pieces For use under a low ozone concentration environment...

カタログの7ページ目を開く

Vacuum Pad Series Vacuum Pad Multi-Bellows Series ■ Vacuum pad + Fixed type holder Dimensions VPMA Fixed type / Top port / Push-in fitting / Mini holder RoHS Compliant Copper alloy free available Connection config. code ※ .5 : Replaced with Pad rubber material code. Refer to page 822 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). -S3 spec. is available for model codes with 9 in the table above. ※ .Pad material N, NE, and G are not suitable for use under ozone environment. ※ .Tightening torque of a pad...

カタログの8ページ目を開く

VPMA Fixed type / Top port / Barb fitting / Mini holder Copper alloy free available RoHS Compliant Connection config. code ※ .5 : Replaced with Pad rubber material code. Refer to page 822 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Pad material N, NE, and G are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder fixing bulkhead nut is as below. ▪Pad O.D.：ø10mm ▶ 2~3N·m.

カタログの9ページ目を開く

Vacuum Pad Series Vacuum Pad Multi-Bellows Series Fixed type / Top port / Push-in fitting / Standard holder VPA10W5-6J9 Copper alloy free available RoHS Compliant Connection config. code ※ .5 : Replaced with Pad rubber material code. Refer to page 822 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). -S3 spec. is available for model codes with 9 in the table above. ※ .Pad material N, NE, and G are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder fixing bulkhead nut is as...

カタログの10ページ目を開く

Fixed type / Top port / Barb fitting / Standard holder RoHS Compliant VPA20W569 VPA30W569 VPA40W569 VPA50W569 Connection config. code Copper alloy free available ※ .5 : Replaced with Pad rubber material code. Refer to page 822 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Pad material N, NE, and G are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder fixing bulkhead nut is as below. ▪Pad O.D.：ø10mm ▶ 2.5~3.5N·m. ▪Pad O.D.：ø20~ø50mm ▶ 12~14N·m. Fixed type / Top port /...

カタログの11ページ目を開く

multi-bellow 1 / 46ページ

カタログの抜粋

NIHON PISCO CO.のすべてのカタログと技術パンフレット

multi-bellow
1 / 46ページ