JSD series
1 / 10ページ

カタログの抜粋

Q Troubled by unintended setting change ？ A Recessed Screw Speed Regulator JSD It prevents unnecessary manual adjustments during the operations. Design without an external needle for speed adjustment. Use a slot screwdriver to adjust the needle. Approx. 2/3 height of the conventional speed controller.* Suitable for a small space. Compact piping! *Compared to the max. height of the conventional speed controller. Rotation of the resin body Rotation of the resin body Fluid medium 360° rotatable resin body (Elbow type). 360° rotatable resin body and push-in fitting part (Free type). Free direction for piping. Operating pressure range Check valve opening pressure Operating temp. range Rotation of the push-in ﬁtting part Rotation of the resin body Rotation of the resin body Banjo type Parts name Lock claws Release ring Tube Guide ring Elastic sleeve O-ring Metallic body *1 Resin body Diaphragm Needle Rotation of the push-in Universal ﬁtting part Material Stainless steel POM Polyurethane or nylon Nickel-plated brass NBR NBR Nickel-plated brass PBT HNBR Nickel-plated brass *1. Metallic body with M3 thread : Special stainless steel (Austenite or ferritic stainless steel with SUS303 equivalent corrosivity) *2. Gasket for metric thread : SUS304+NBR or SPCC

カタログの1ページ目を開く

Model designation (Example) JSD C 1/4 - N1 A U ① Recessed Screw speed control valve ④ .Control direction Code Control direction Meter-out (Exhaust) control Meter-in (Supply) control Controlled flow Free flow Solenoid valve Single acting cylinder Solenoid valve Cylinder Controlled flow Free flow Speed controller Speed controller Air from thread side is controlled. Air from tube side is not controlled and ﬂows out from thread side. Air from tube side is controlled. Air from thread side is not controlled and ﬂows out from tube side. Grooved markings on three points on its upper plug, and a JIS...

カタログの2ページ目を開く

Recessed Screw Flow Control Valve JSDC Banjo (inch- NPT）　 Release ring Mini øG: 1/8, 5/32 Release ring Standard Unified thread Unit：mm Model code Weigh List price (g) ($) 6.3 *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. wi

カタログの3ページ目を開く

JSDC Banjo（mm - R, inch - R）　 Release ring Mini øG: 3 ∼6, 1/8 Release ring Standard Metric thread Unit：mm Model code JSDC3-M3 ♶₅ JSDC3-M5 ♶ ₅ Weigh List price ($) (g) *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [ 　] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver tip, and...

カタログの4ページ目を開く

Recessed Screw Flow Control Valve JSDS Universal (inch- NPT） Release ring Mini øG : 1/8, 5/32 Release ring Standard Unified thread Unit：mm Model code Weigh List price (g) ($) *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of t

カタログの5ページ目を開く

JSDS Universal（mm - R, inch - R） Release ring Mini øG : 3 ∼6, 1/8 Release ring Standard Metric thread Unit：mm Model code JSDS3-M3 ♶♷ JSDS3-M5 ♶ ♷ *1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [　 ] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max....

カタログの6ページ目を開く

JSDS 6-01 8-01 1/4-N1 5/16-N1 Cylinder tube I.D. Max. ø32mm Control flow Free flow Control flow Flow rate (l/min(ANR)) Control flow Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow characteristic (Reference)

カタログの7ページ目を開く

Control flow Free flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR Control flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR Flow rate (l/min(ANR))

カタログの8ページ目を開く

Recess Recessed Screw Flow Control How to adjust the speed Use a slot screwdriver to adjust the speed of actuators with slot-head speed controller. Refer to the table below for size of slot screwdrivers. ●The tip of a slot screwdriver A Max. thickness of the applicable slot screwdriver tip （㎜） M3×0.5, M5×0.8, U10 0.7 Thread size（R） B Max. width of the applicable slot screwdriver tip （㎜） 3.5 counterclockwise direction clockwise direction to reduce from a fully closed state to increase the speed of an actuator. How to insert and disconnect 1. How to insert and disconnect tubes ① .Tube...

カタログの9ページ目を開く

Detailed Safety Instructions Warning 1. When controlling the speed of actuators, slowly release the air by adjusting the needle from a fully closed state. In case the needle is opened, actuator can move suddenly. Turn needle in the clockwise direction to close, and in the counterclockwise to open. 2. Do not swing or rotate resin body of the products by force. It may damage to the products and cause a fluid leakage. 3. Flow rate may be changed by needle rotation when using slot-head speed controller at the place having vibrations or shocks. Use conventional speed controller having lock-nut...

カタログの10ページ目を開く

JSD series 1 / 10ページ

カタログの抜粋

NIHON PISCO CO.のすべてのカタログと技術パンフレット

JSD series
1 / 10ページ