カタログ >
NIHON PISCO CO., Ltd. >
Fiber Membrane Air Dryer

Fiber Membrane Air Dryer
1 / 12ページ

カタログの抜粋

Hollow Fiber Membrane Air Dryer with Built-in Push-In Fitting Fiber Membrane Filter Type Dryer which does require no power supply. Higher performance than a refrigeration air dryer. is removed through Hollow Fiber Membrane with no drain. ● No heat discharge nor vibration. Compact and lightweight body makes it portable and space saving. ● Easy ● Purging air volume is adjustable. ● Push-In

カタログの1ページ目を開く

Membrane Dryer ■ Model Designation (Example) DMM 100 ⑤ Operating Flow Rate (Outlet Port) ③ Tubing Dia. or Female Thread Dryer (Plastic Body) Dryer (Metal Body) Dryer (Union Straight) Dryer (Flexible Type) Code Flow Rate SFCM ③ Tube Dia. / Female Taper Thread (DMM100 and 301 only) 00 Code Female thread  In case INCH size tubing connection is needed; Rc1/4 - specify PC1/4-02 (straight 1/4" O.D.), PC3/8-02 (straight 3/8" O.D.), PL1/4-02 (elbow 1/4" O.D.) or PL3/8-02 (elbow 3/8" O.D.) Rc3/8 - specify PC3/8-03 (straight 3/8" O.D.), PC1/2-03 (straight 1/2" O.D.), PL3/8-03 (elbow 3/8" O.D.) or...

カタログの2ページ目を開く

■ Specifications Fluid Medium Operating Pressure Range Fluid Medium Temp. Inside of hollow fiber：43 ~ 123psi (0.3 ～ 0.85MPa) Outside of hollow fiber：0 ~ 7.25psi (0 ～ 0.05MPa) 32~104°F ( 0 ～ 40℃ (No freezing)) Operating Temp. Range * When fluid medium other than air is used, contact us for details before using. ■ Basic Performance（For 3.53SCFM (100l/min(ANR))） ■ Inlet Port Air Pressure Air Temp. Water Vapor Amount Purge Rate ■ Outlet Port Air 3.53SCFM (100 l/min(ANR)) -13°F (-25℃) or less (Atmospheric pressure) ■ Mechanism of Dehumidification ■ Only vapor in compressed air flows inside the...

カタログの3ページ目を開く

Membrane Dryer ■ Piping Example ■ neumatic System with Oil Mist P * Place a Dry Unit with Mist Filter for a pneumatic system containing oil mist. ■ neumatic System without Oil Mist P * Make sure to place a filter for a pneumatic system generating water drop. ■ Relation between Use Condition and Dry Level Refer to the following chart when you select Fiber Dry Series. Low High Supplied Air Pressure Low High Supplied Air Temp. Small Large Supplied Air Amount ■ Classification by Flow Rate Flow Rate (l/min(ANR)) 500 Small Large Purging

カタログの4ページ目を開く

Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” and “Common Safety Instructions for Fiber Dry Series and Dry Unit Series” . 1. Be sure to turn Purging Flow Adjustment Dial to the correct direction as the marking on the body shows. Incorrect way can damage the product. ■ Adjustment Method of Purging Flow Purging Flow Adjustment Dial ・When the amount of Purging Flow is large, turn the dial clockwise so that purging flow decreases. Turn the dial counterclockwise to increase the purging flow. But the temp. of dew...

カタログの5ページ目を開く

Membrane Dryer DMM Metal Body Dryer 100 Tube O.D. Model Code øD Weight CAD (g) file name Dehumidifying Performance Chart (example) Purging Flow Chart Achieved Dew Point (At atmospheric pressure) (℃) Purging Flow (l/min(ANR)) Purging Hole DMM Resin Body Dryer 301 Unit：mm Tube O.D. Model Code øD DMM301-6 DMM301-8 DMM301-10 DMM301-12 DMM301-16 DMM301-00 Purging Flow Adjustment Dial Weight CAD (g) file name Dehumidifying Performance Chart (example) Purging Flow Chart Achieved Dew Point (At atmospheric pressure) (℃) Purging Flow (l/min(ANR)) Purging Hole 100 150 200 250 Operating Flow Rate...

カタログの6ページ目を開く

DMM Resin Body Dryer Unit：mm Tube O.D. Model Code øD Weight CAD (g) file name 65 * Purging Flow Adjustment is not available for DMM040. Refer to the following table to select the best item. Operating Flow Rate (Outlet Port) Dehumidifying Performance Chart (example) Purging Flow Chart Purging Flow(l/min(ANR)) Achieved Dew Point (At atmospheric pressure) (℃) DMP Resin Body Dryer 100 Tube O.D. Model Code øD DMP100-4 DMP100-6 DMP100-8 DMP100-10 Weight CAD (g) file name Dehumidifying Performance Chart(example) FDT, DMP Purging Flow Chart Achieved Dew Point (At atmospheric pressure) (℃) Purging...

カタログの7ページ目を開く

Membrane Dryer FDT DMP Dryer and Filter Set 100 Manual Drain Tube O.D. Model Code L1 øD Auto Drain M5 Female Thread Drainage

カタログの8ページ目を開く

DMB Union Straight Dryer 100 Tube O.D. Model Code øD Weight CAD (g) file name Dehumidifying Performance Chart (example) Purging Flow Chart Achieved Dew Point (At atmospheric pressure) (℃) Purging Flow (l/min(ANR)) (Fixing hole for bracket) DMB Union Straight Dryer Unit：mm Model Code Dehumidifying Performance Chart (example) Purging Flow Chart Purging Flow (l/min(ANR)) Achieved Dew Point (At atmospheric pressure) (℃)

カタログの9ページ目を開く

Membrane Dryer DMF Flexible Type Dryer 040 526 Tube O.D. Model Code øD Dehumidifying Performance Chart (example) Purging Flow Chart Purging Flow (l/min(ANR)) Achieved Dew Point (At atmospheric pressure) (℃) Weight CAD E2 (g) file name ■ Fiber Dry Series Mounting Bracket ■ Use two fixing holes to install the product by M5 screws Push-In Fitting ■ Recommended Tube O.D.: Wide range of the O.D. ø4, 6, 8, 10, 12 and 16mm ■ When the Purging Flow is too much, it can be reduced b

カタログの10ページ目を開く

Visit "Dryer Unit" for combination with air filter, mist filter and regulator

カタログの11ページ目を開く

Common Safety Instructions for Fiber Dry Series and Dry Unit Series 　Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series. Warning 1. When installing the dryer, provide adequate support and fix it securely. Looseness or dropping off of the dryer may cause injuries. 2. Do not use the dryer without the explosion-proof casing (bowl guard). If the bowl breaks, the pieces may fly apart to cause injuries. 3. Make sure to set the lock lever on the filter, mist filter and micromist filter to "lock" before using. Otherwise,...

カタログの12ページ目を開く