Chassis / IP20
1 / 4ページ

KBVF Hybrid Drive A Digital AC Drive with Analog Interface IP20 Enclosure Primary Features Horsepower 1/10 to 5 HP 115/230/460 VAC - 1ph & 3ph Input Output 230/460 VAC - 3ph 200% Starting Torque Power and Status Indicators GFCI Compatible Allows equipment to operate with Ground Fault Circuit Interruption circuit breakers or outlets. (Factory programming required.) Benefits Saves Time Easy to Install and Simple to Operate Does not require commissioning. Up and running in less than 10 minutes. Motors Last Longer Proprietary CL Software Provides overload protection, prevents motor burnout and eliminates nuisance tripping. UL approved as electronic overload protector for motors. Energy Saving Uses only the power the application requires. Replacing constant speed with variable speed will significantly reduce energy costs. When an off the shelf drive does not meet your needs, KB will work with you to provide a custom drive solution, Ready to Use, “Out-of-the-Box.” Customization includes: Pre-calibrating or programming of a stock control, adding a custom label or branding, custom software, PLC functions or designing a new control. Discover more at: https://www.kbelectronic

Additional Features Sensorless Flux Vector Control Flux Vector Compensation with Static Auto-Tune provides excellent speed regulation with high torque loads throughout the entire speed range. Auto energy saving at light loads. Smooth motor torque. Electronic Inrush Current Limit (EICL™) Protection Eliminates harmful inrush AC line current during power up. Provides smooth recovery to the previous set speed during a momentary power loss. Holding Torque at Zero Speed Resists motor shaft rotation when the drive is in “Stop” mode. Regeneration Protection Eliminates tripping due to high bus...

Ratings & Dimensions 115 VAC 1-Phase Input • 230 VAC 3-Phase Output 230 VAC 1-Phase Input • 230 VAC 3-Phase Output Ratings 115/230 VAC 1-Phase Input • 230 VAC 3-Phase Output Ratings 230 VAC 3-Phase Input • 230 VAC 3-Phase Output Ratings 460 VAC 3-Phase Input • 460 VAC 3-Phase Output** Ratings Model No. Main Speed Potentiometer 5 kΩ (Supplied) 3/8" *Rated 2 HP (1.5 kW), 6.7 Amps with 1-Phase Input. **Contains SIVFR signal input isolation and Run/Fault output relay. Specifications 1/4" Round Shaft Maximum Load (% of Current Overload for 2 Minutes) Carrier, Switching Frequency (kHz) Output...

General Connection Diagram Main Speed Potentiometer 5 kΩ (Supplied) COMP Ground (Earth) AC Line Input (varies by model) KB ELECTRONICS – a Control Techniques brand +1 (954) 346-4900 • Fax +1 (954) 346-3377 • Call Toll Free +1 (800) 221-6570 info@kbelectronics.com • www.kbelectronics.com A42155 – Rev. H