カタログ >
Nextech >
Nextech 23.8”Projected Capacitive Touch Module

Nextech 23.8”Projected Capacitive Touch Module
1 / 6ページ

カタログの抜粋

Nextech 23.8”Projected Capacitive Touch Module - 1

Nextech 23.8" Projected Capacitive Touch Module TP-238P0A0CW-001

Nextech 23.8”Projected Capacitive Touch Module - 2

Nextech 23.8" Projected Capacitive Touch Module TP-238P0A0CW-001 General Description The TP-238P0A0CW-001 is a Projected Capacitive touch panel, it supports 10 points multi-touch. It is bonded with a 1.8mm, 7H hardness, Soda-lime Tempered cover lens, complies IK rating 07. The structure of TP-238P0A0CW-001 is "G/G" , optional AG coating. It is designed by Nextech Co.,Ltd.

カタログの2ページ目を開く

Nextech 23.8”Projected Capacitive Touch Module - 3

Nextech 23.8”Projected Capacitive Touch Module TP-238P0A0CW-001

カタログの3ページ目を開く

Nextech 23.8”Projected Capacitive Touch Module - 4

Nextech 23.8" Projected Capacitive Touch Module TP-238P0A0CW-001

カタログの4ページ目を開く

Nextech 23.8”Projected Capacitive Touch Module - 5

Nextech 23.8" Projected Capacitive Touch Module TP-238P0A0CW-001

カタログの5ページ目を開く

Nextech 23.8”Projected Capacitive Touch Module - 6

Nextech 23.8" Projected Capacitive Touch Module TP-238P0A0CW-001 Inspection environment conditions : 1. The touch panel has to be inspected at a clean room of at least class 10,000. 2. The visual inspection environment should be set at 15~25°C and 25~75% humidity. 3. The illumination of the appearance inspection should be 800~1000Lux. 4. The visual inspection should be kept the distance 35CM or more between the touch panel and the eyes. 5. The viewing angle should be 45 degree 6. Visual inspection time should be less than 25 seconds.

カタログの6ページ目を開く