DATA CENTER OPTICAL ASSEMBLIES
1 / 14ページ

{{requestButtons}}

カタログの抜粋

DATA CENTER OPTICAL ASSEMBLIES - 1

DATA CENTER OPTICAL ASSEMBLIES TO SUPPORT QSFPf CFP AND CXP INDUSTRY STANDARD PINOUT CONFIGURATIONS

カタログの1ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 2

Data Center Optical Assemblies to Support QSFP CFP and CXP Industry , Standard Pinout Configurations QSFP, QSFP+ and zQSFP+ optical cable assemblies use lowprofile round cables for improved cable management in high‑density applications Molex Quad Small Form Pluggable (QSFP+) passive optical cable assemblies meet the QSFP+ interface specification. Multiple cable designs provide improved fiber management options depending on the application and distance requirements. MTP QSFP+ cables are constructed with 12-fiber 3.0mm round cable for short-run interconnect cable assemblies. A robust 4.5mm...

カタログの2ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 3

Understanding MPO Polarity as it relates to end to end fiber links: To understand the polarity of an MPO cable, you must first start with the key on the MPO connector. Each mPo connector will have a keying feature that will govern the polarity on an end to end link. When installing MPO cables, the key can be oriented in a key up/Key up or Key up/Key Down configuration. In the below image you will notice the Key feature on the MPO connector highlighted in orange. Fiber Ribbon Guide Pins/Holes

カタログの3ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 4

When MPO connectors are installed in a Key up position, the fibers in the MT ferrule will be 1-12 and from left to right in ascending order as seen below. When the MPO is installed in a Key Down position, the fiber path is inverted to 12-1 or from left to right in a descending order as shown below.

カタログの4ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 5

The next image will outline a Key Up/Key Up configuration. With this orientation the fiber path will be as follows, fiber 1 on connector A will be aligned with fiber 12 on connector B. In this example below, we will see the Key Up/Key Down orientation where fiber 1 on connector A is aligned with fiber 1 on connector B. Understanding fiber path and alignment is crucial when designing in MPO/MTP cables as this will dictate the signal path from end point to end point.

カタログの5ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 6

With understanding polarity as noted above, we can now review the details regarding the “Type” of With understanding polarity as noted above, we can now review types or configurations of cable MPO/MTP cables that are available for sale. There are three different the details regarding the “Type” of MPO/MTP cables that are available for sale. There are three different types or that can be used to manage fiber polarity, they are Type A, Type B and Type C. Each of these cable configurations of cable that can be used to manage fiber polarity, they are Type A, Type B and configurations are listed...

カタログの6ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 7

'Distances are Industry standard averages and are subject to various transmission issues such as glass quality and device performance. Cable Performance Specifications Ordering Information — QSFP, CXP and CFP Cables Please note that additional lengths, styles and custom cables are available, please contact Molex Sales. Please contact your local Molex Sales Engineer for more details and drawing availability. Part Number *Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiber "Breakout cables available with FlexiBend MTP connector - please contact Molex sales for details

カタログの7ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 9

*Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiber.

カタログの9ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 10

*Cables longer than 30.0m will be supplied with 4.5mm ruggedized jacketed fiber. **Breakout cables available with FlexiBend MTP connector, please contact Molex Sales for details.

カタログの10ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 11

MPO/MTP Trunk Cables for Data Centers Refer to individual drawings or product specifications for additional details. *For 24 fiber cables, refer to sales drawing for channel pin-out.

カタログの11ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 12

Ethernet InfiniBand Fibre Channel PCIe SAS M Note: Port Bandwidth = Data Rate x Number of Lanes

カタログの12ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 13

§ In development ** Additional product detail available from www.molex.com/link/datacenter.html Abbreviations Fibre Channel (FC), Fibre Channel over Ethernet (FCoE), InfiniBand (IB), Serial Attached SCSI (SAS)

カタログの13ページ目を開く
DATA CENTER OPTICAL ASSEMBLIES - 14

Get more insights at: www.molex.com/fiber/index.html Molex is a registered trademark of Molex, LLC in the United States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners

カタログの14ページ目を開く

Molex/モレックスのすべてのカタログと技術パンフレット

  1. Pre-Crimped Leads

    4 ページ

  2. Premo-Flex FD19

    2 ページ

  3. SlimStack

    11 ページ

  4. mPm

    4 ページ

  5. Brad Nano-Change

    3 ページ

  6. Outlet Boxes

    3 ページ

  7. Combo Antennas

    2 ページ

  8. MTP* /MPO ADAPTERS

    11 ページ

  9. Non-Magnetic

    1 ページ

  10. Vacuum

    2 ページ

  11. FCT Catalog

    490 ページ

  12. Crimp Flange

    1 ページ

  13. Cable Assembly

    2 ページ

  14. Fiber Optics

    6 ページ

  15. HBMT ™

    1 ページ

  16. Array-BeamTM

    2 ページ

  17. C-Grid® and SL?

    66 ページ

  18. Milli-Grid?

    69 ページ

  19. Storage Connectors

    20 ページ

  20. Application Tooling

    91 ページ

  21. Backplane Products

    48 ページ

  22. FFC/FPC Connectors

    34 ページ

  23. Power Connectors

    115 ページ

  24. I/O Products

    94 ページ

  25. Fiber Optic Products

    27 ページ

  26. Industrial Products

    78 ページ

カタログアーカイブ

  1. Cable Grips

    36 ページ

  2. Wiring Devices

    86 ページ

  3. Portable Lighting

    39 ページ

  4. Ethernet products

    26 ページ

  5. Profibus products

    40 ページ

  6. DeviceNet products

    68 ページ