カタログ >
MKS Instruments >
Test Diagnostic Board

Test Diagnostic Board
1 / 2ページ

カタログの抜粋

Product Accessories Test Diagnostic Boards CALIBRATION, VOLTAGE MONITORING & TROUBLESHOOTING MKS voltage monitoring diagnostic boards offer a convenient and fast method for calibrating, testing and troubleshooting MKS Mass Flow Controllers, Baratron® Capacitance Manometers and other electronic instruments. Features Benefits • Industry standard DB-9, 15, 15HD, 25 and 37, male/female connectors • One-to-one pin out configuration • Solder post test terminals for each connector line • Compact package allows for testing, calibration and set up, and troubleshooting in tight spaces • Diagnose problems without removing the instrument from the system • Monitor the “health” of the Baratron or Flow Controller • Perform a baseline on each type of MFC to understand what the response is under normal circumstances • Verify power supply voltage level and condition • Check for ground loops or stray voltages between the common and ground pins MKS test diagnostic printed circuit boards are configured with standard, male and female D-type connectors with a straight one-to-one pin out configuration. These boards can be inserted between the I/O connector of an instrument and it’s mating cable, providing easy and clean access to test pins connected directly to the instruments’ I/O contacts. This allows insitu monitoring of instrument input and output signals, supply power and ground quality. In addition, these boards can be used to calibrate and zero MKS Baratron® Capacitance Manometers and Mass Flow Controllers. MKS Baratron® Capacitance Manometer with TDB-15 Voltage Monitoring Diagnostic Board

カタログの1ページ目を開く

Part Number Connector Illustration Test diagnostic board with 9 pin D female to male Test diagnostic board with 15 pin D female to male Test diagnostic board with Test diagnostic board with 20 pin edge card female to male Test diagnostic board with 25 pin D female to male Test diagnostic board with 37 pin D female to male TDB-15HD 15 pin high density D female to male * US Domestic List Price Ground Loops or Stray Voltages Measure Setpoint Signal Power Supply DC Voltage & AC Noise Measure Valve Output for MFCs Signal Output Measure Flow/Pressure Output Signal for Zeroing and Stability...

カタログの2ページ目を開く