カタログ >
Miller Electric Mfg. >
PerformArc Positioners

PerformArc Positioners
1 / 6ページ

カタログの抜粋

Fine Combination Large Selection of Positioners and Peripherals for Better and Faster TAWERS Welding Panasonic pursues OV\\j in welding

カタログの1ページ目を開く

Realized better welding quality, faster welding speeds and smaller footprint of the robotic welding. Single-axis positioners H Side mount 2-axis positioners • Best-in-class motion speed Maximum speed is twice that of conventional models. (1OOO kg type) • Slim design allows compact welding system Depth is about 30% smaller than conventional models. (500 kg type) • Space-saving cable connection method Cable protruding length is less than half of conventional models. (120 mm) Connection to the other side is available as an option. • Dust proof construction and Large hollow shaft diameter...

カタログの2ページ目を開く

Center mount tilt rotate positioner High speed type JV SGT Two types available with •80 % faster maximum speed compared with conventional •Easier installation with three selectable cable outlet positions. lOutside dimensions

カタログの3ページ目を開く

Motor units □ depends on the number of external axis. (1 axis : K. 2 axes : A. 3 axes : L. 4 axes : B. 5 axes : depends on the combined external axis. External axes ■Connection example to Gl controller Purchase the same number of connection cables as external axes. external axes

カタログの4ページ目を開く

(Independent amplifier type) External controller for external axes (WGm/GI) iServo off function for each axis ensures safety. SSAII the cables are flexible type. Extension cables can only be used with connection cables. SSSAII the cables are flexible type. SSExtension cables can only be used with connection cables. ^Connect each connector of the 5.5 kW motor type connection cable. SSOnly external axis connection cables (standard) are extendable. SSSThe maximum cable length is 30 m including extension cable.

カタログの5ページ目を開く

Simple teaching ■Teaching example of complicated •Easy welding speed setting. Welding speed can be set directly from robot regardless of pipe diameters. It eliminates complicated calculation and reduces teaching time. •Greatly reduced teaching points. (compared with conventional systems) Linear, circular interpolations, and weaving movement are now available while rotating work with the positioner. This allows easy torch positioning for compli- cated workpieces and high precision welding with minimum teaching points. •Optimum welding position. Optimum torch angle for the best bead shape is...

カタログの6ページ目を開く