カタログ >
Miller Electric Mfg. >
Multimatic 215

Multimatic 215
1 / 4ページ

カタログの抜粋

Quick Specs Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home Processes MIG (GMAW) Flux-cored (FCAW) DC TIG (GTAW) DC stick (SMAW) Weld Thickness Input Power MIG: 24 ga.-3/8 in. steel 120 or 240 V Stick: 16 ga.-3/8 in. steel Input Phase Multiprocess capabilities allow for MiG, flux-cored, DC TIG and DC stick welding. Intuitive color LCD user interface makes it quick and easy to adjust parameters. Auto-Set™ Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Easy to set up and use. Multi-voltage plug (MVP™) allows you to connect to 120 or 240 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord. Angled wire drive with Quick Select™ drive roll for smooth feeding and quick wire changes. Smooth-Start™ for consistently smooth, spatter-free MiG starts. Auto Spool Gun Detect™ automatically detects when a MiG gun or spool gun is connected eliminating the need for a switch. Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine. Thermal overload protection automatically shuts the power source down if airflow through the unit is blocked or the duty cycle is exceeded. Comes complete with: ■ Power source ■ 6.5 ft. (2 m) power cord with MVP plugs for 120 V and 240 V ■ 10 ft. (3 m) M-100 MiG gun and cable assembly ■ 13 ft. (4 m) cable electrode holder and 25 mm Dinse-style connector ■ 10 ft. (3 m) work cable with clamp and 25 mm Dinse-style connector ■ Flow gauge regulator and gas hose for argon and AR/CO2 mix ■ Hobart® spool of .030 in. (0.8 mm) solid wire ■ Two contact tips for .030 in. (0.8 mm) wire ■ Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire ■ Material thickness gauge >-229895 ■ Hook-and-loop cord wraps Note: Shielding gas and safety equipment not included. Welder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor. Miller Electric Mfg. Co. An iTW Welding Company 1635 West Spencer Street P.O. Box 1079 Appleton, Wi 54912-1079 USA Equipment Sales US and Canada Phone: 866-931-9730 FAX: 800-637-2315 international Phone: 920-735-4554 international FAX

カタログの1ページ目を開く

Specifications (Subject to change without notice.) Certified by Canadian Standards Association to both the Canadian and U.S. Standards. c^^us 1. Material Thickness Buttons 2. Auto-Set™ Button 3. Wire/Tungsten Diameter and Stick Rod Type Buttons 4. Process Selection Buttons 5. Adjustment Knob 6. LCD Display Panel 7. Adjustment Knob 8. Plastic Hub with Retaining Ring for 8-inch Spools (shaft also accepts 4-inch spools) 9. Calibrated Tension Knob 12. Trigger Control Connector Note: Power switch and gas soienoid are on power source rear panel. MIG Duty Cycle Chart TIG Duty Cycle Chart Stick...

カタログの2ページ目を開く

T Spoolmate “100 Spool Gun 300371 Direct-connect spool gun handles .030—.035 inch aluminum (4043 only) and .023—.035 inch (0.6-0.9 mm) steel/stainless steel wires. Rated at 135 amps, 30-percent duty cycle. Includes 12-foot (3.7 m) cable assembly and custom carrying case. — Spoolmate" 150 aluminum and .023—.035 inch (0.6-0.9 mm) steel/stainless steel wires. Rated at 150 amps, 60-percent duty cycle. Includes 20-foot (6.1 m) cable assembly. TIG Kit 301337 Kits comes complete with everything needed to TIG weld with the Multimatic 215. Includes Weldcraft™ A-150 TIG torch with...

カタログの3ページ目を開く