カタログ >
MICRO-CONTROLE / Spectra-Physics >
SMC100 Single-Axis Motor Controller/Driver

SMC100 Single-Axis Motor Controller/Driver
1 / 2ページ

カタログの抜粋

SMC100 Single-Axis Motor Controller/Driver - 1

M o t o r i z e d P o s i t i o n i n g Email: sales@newport.com • Web: newport.com 851 TECHNICAL REFERENCE MOTORIZED LINEAR STAGES MOTORIZED ROTATION STAGES MOTORIZED OPTICAL MOUNTS MOTORIZED ACTUATORS CONTROLLERS AND AMPLIFIERS SYSTEMS SMC100 The SMC100CC and SMC100PP are single axis motion controllers/drivers for DC servo motors (SMC100CC) and 2-phase stepper motors (SMC100PP) up to 48 VDC at 1.5 A rms. They provide a very compact and low-cost solution for driving most of Newport’s stages, including the popular GTS and ILS linear stages, URS rotation stages, and LTA actuators. Communication with the SMC100 is achieved via the integrated RS-232-C interface, or from a USB port using the external adapter SMC-USB (requires Windows™ operating system). Intuitive, Windows-based software supports all configurations and enables basic motion. Advanced application programming is simplified by an ASCII command interface and a set of two-letter mnemonic commands. When used with Newport ESP enhanced positioners, the SMC100 will detect the connected product automatically for the most straightforward system configuration. This exclusive Newport feature does not only reduce configuration time, but provides also the best protection of your equipment from any accidental damage. Up to 31 controllers can be networked through the internal RS-485 communication link. This internal multi-drop full-duplex serial link simplifies communication to several units, without the need for sending “address selection commands”. This results in enhanced multi-axes management with improved program readability and faster communication compared to alternative systems based on an RS-232-C chain. The typical execution time for a tell position command, for instance, is only in the range of 10 to 20 ms. The SMC100 also features advanced “multi-axes” commands, such as “Stop all” or “Start a motion of all axes” and performs at a 57,600 baud rate communication speed. Furthermore, for an efficient process control, the SMC100 features dedicated digital outputs for "In Motion" and "Not referenced". • Affordable single-axis control • Advanced Backlash and Hysteresis compensation mode • RS-232-C or USB communication for easy user interfacing • Internal RS-485 link allows networking up to 31 controllers • Convenient multi-axis programming • Enhanced system safety by reading parameters from Newport ESP compatible stages The SMC-RC is an affordable remote control for the SMC100 controller. It features a 16-characters LCD for position display and 4 push buttons for +/- jog motion, configuration, homing, motor on and motor off. Single-Axis Motor Controller/Driver

カタログの1ページ目を開く

SMC100 Single-Axis Motor Controller/Driver - 2

852 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 M o t o r i z e d P o s i t i o n i n g MOTORIZED ROTATION MOTORIZED LINEAR STAGES TECHNICAL REFERENCE STAGES SYSTEMS CONTROLLERS AND AMPLIFIERS MOTORIZED ACTUATORS MOTORIZED OPTICAL MOUNTS Description Single-axis motion controller/driver for DC servo motors (SMC100CC) or stepper motors (SMC100PP) Controller Capability SMC100CC: DC servo motors in open or closed loop operation SMC100PP: 2-phase stepper motors, bi-polar mode, open-loop operation Motor Output Power SMC100CC: 48 VDC @ 1.5 A rms, 3 A peak SMC100PP: 48 VDC @ 1.1 A peak per phase...

カタログの2ページ目を開く