カタログ >
MICRO-CONTROLE / Spectra-Physics >
Apex Deuterium Lamp Sources

Apex Deuterium Lamp Sources
1 / 1ページ

カタログの抜粋

80 Phone: 1-800-222-6440 • Fax: 1-949-253-1680 L i g h t S o u r c e s TECHNICAL REFERENCE MONOCHROMATOR AND INCANDESCENT SOURCES ARC SOURCES DEUTERIUM SOURCES CALIBRATION SOURCES FIBER ILLUMINATORS PHOTOLITHOGRAPHY SOLAR SIMULATORS INSTRUMENTS ACCESSORIES FOR ORIEL LIGHT SOURCES Oriel Apex Deuterium Lamp Sources 70635 Apex Deuterium Source Deuterium Sources are ideal for UV Spectroscopy applications; the lamps emit high intensity UV radiation with little VIS and IR. The Apex system is a fully integrated package - the lamp, condenser and electronics are in a single enclosure. Simply mount the lamp, plug in the power cord, and turn on the source. You don't need to align the lamp nor adjust the power supply setting (note; you cannot use the 68950 Light Intensity Controller with Apex systems). Fig. 1 shows the simple optical path of an Apex Deuterium Source. A fused silica aspheric lens collects the lamp's radiation and collimates it to a 1.3 inch diameter (33 mm) beam. You can then re-focus the output with one of our focusing lens assemblies (see page 233). If you are focusing into a fiber, use our Apex Fiber Illuminator; see page 157. The output flange of the 70635 Apex Source is a 1.5 Inch Series female flange. You can couple any male flanged accessory of the same series size to the output. Safety Considerations Deuterium Sources emit very high levels of UV radiation. Even short periods of exposure to UV radiation can cause burns to the skin and eyes. Always wear protective eyewear, or gloves (see page 246), and protective clothing. Or, enclose the beam path. • Fully integrated, compact, and simple-to-use • High intensity UV output • Highly collimated, 1.3 inch diameter output beams FUSED SILICA ASPHERIC LENS DEUTERIUM LAMP Fig. 1 Optical configuration of Apex Deuterium Lamp Source. Specifications Collimated Output Diameter 1.3 in. (33 mm) Wattage 30 Lens Multiplication Factor* 0.05 Beam Uniformity ±5 % Light Ripple <0.5 % r.m.s. Line Regulation 0.1 % AC Input 95 - 132 V/2A 190 - 264 V/1A 50 - 60 Hz * The lens multiplication factor is a measured parameter for the lens. It helps in computing the approximate total power of collimated output in any wavelength band. Use formulae and sample calculations to compute the approximate total power from your source. Ordering Information Apex Deuterium Source The 70635 Source operates any of the following lamps; please specify lamp when ordering a source. Model Lamp Type 70635 70620 30 W High Uniformity, OF 70621 30 W High Irradiance, OF 70622 30 W High Irradiance/Stability, OF 70623 30 W High Uniformity, Full Spectrum 70624 30 W High Irradiance, Full Spectrum Replacement Deuterium Lamps Model Description 70620 30 W High Uniformity, OF 70621 30 W High Irradiance, OF 70622 30 W High Irradiance/Stability, OF 70623 30 W High Uniformity, Full Spectrum 70624 30 W High Irradiance, Full Spectrum ADJUSTABLE HEIGHT 0.5-1.13 (13-29) 11.00 (279) 7.02 (178) 4.00 (102) 0.24 (6) 9.96 (253) 9.00 (229) 11.87 (301) MOUNTING PLATE HOLE .265 DIA. (4 PLCS.) Fig. 2 Dimensional diagram of 70635 Deuterium Apex Source. Note: Please check our product web pages for more technical information at www.newport.com.

カタログの1ページ目を開く