ST5491E Vibration Transmitter
1 / 2ページ

ST5491E Indicating Velocity 4-20 mA SEISMIC PRODUCTS Vibration Transmitter Applications • • • • • • • • • • Blowers Centrifuges Compressors Engines Fans Generators Motors Pumps Turbines Turbochargers Model ST5491E is the ideal solution for sensing vibration on most plant equipment. This precision case mounted, indicating velocity vibration sensor and signal conditioner in a single package is built to provide years of reliable service. A simple two-wire loop signal proportional to velocity is generated for transfer to a programmable logic controller (PLC), distributed control system (DCS) or other 4-20 mA input devices. Simply mount the transmitter on the machine case, connect the 2-wire loop and read and/or record the vibration. WEIGHT & DIMENSIONS Features • LCD Indicator • Loop-powered • 4-20 mA proportional to velocity • Interfaces w/PLC, DCS and 4-20 mA monitors • Built-in temperature shock protection • “Ski slope” problem protected • Widest frequency range • High & low pass filters • Built-in base & housing strain 2.18 Weight: 0.8 kg (1.8 lbs.)

ST5491E Indicating Velocity 4-20 mA Vibration Transmitter SPECIFICATIONS Vibration Range: 4 to 20 mA output proportional to velocity. Refer to “How to Select A” for ranges. Nonstandard ranges available. Accuracy: 2% Axis Orientation: Any +70°C (+14°F to +156°F) Supply Voltage (Vs): 13 to 30 VDC Enclosure Materials: 303 SS / 316SS Isolation: 500Vrms, circuit to case Enclosure Environmental Rating: NEMA 4X, IP 67 Electrical Connection: Flying leads - 457 mm (24 in.) length, 18 AWG Indicator: 2 ½ digits, ips or mm/s Frequency Response: Standard: 2 - 1500 Hz, available up to 2000 Hz Refer to...