RCP-004
1 / 3ページ

カタログの抜粋

Runner Clearance Probe RCP-004 • Non-contact proximity probe based on eddy current meas uring principle • Linear range: 0 to 4mm • Frequency range : up to 500 Hz(-3dB) • Stainless steel sensor body and sensor tip protection to achieve excellent chemical and mechanical rigidity and excellent wear resistance • 10 meters integral cable • +24VDC power supply, single ended FEATURES Monitoring solution Runner clearance monitoring Typical applications Hydrogenerators DESCRIPTION The RCP-004 displacement probe is used for non-contact measurements of turbine runner clearance of large Francis or Kaplan turbines. The high performance casing probe material allows sealed mounting of the eddy current probe into the turbine throat ring or turbine labyrinths. The entire signal processing is built in the sensor body. The voltage output is directly proportional to the measured distance between the metallic target and the sensor face.

カタログの1ページ目を開く

mcmonitoring GLOBAL SPECIFICATIONS OPERATION

カタログの2ページ目を開く

mcmonitoring ORDERING INFORMATION Part type RCP-004 M1 Ordering code 05.004.000 M1 Description Standard runner clearance probe, max insertion depth = 105mm Part type RCP-004 M2 Ordering code 05.004.000 M2 Description Runner clearance probe with extended length, max insertion depth = 215mm Brown Power supply Green Voltage output White Signal common 0V Black Cable shield MC-monitoring Quality certifications LOCAL REPRESENTATIVE MC-monitoring SA Route Andre Piller 19 CH-1762 Givisiez | Switzerland Phone : +41 58 411 54 00 Mail : info@mc-monitoring.com

カタログの3ページ目を開く