KMK4080
1 / 12ページ

カタログの抜粋

Hook elevation diagram Main boom and lattice extension

Transfer case: Axles lines: Electrical system: Special KRUPP 4-axle carrier, all*welded torsion-resistant box-type construction in high strength steel. 4 double hydraulically telescoping beams with vertical cylinders and outrigger pads. Independent horizontal and vertical movement control on each side ol the chassis* Levelling device* Mercedes-Benz OM 442 diesel, 8 cylinders, water-cooled, with lurbocharger, 270 kW (367 HP) Tank capacity: approx. 100 gal. Transfer case with 2 speeds and longitudinal differential lock* 4 axle lines. Axle lines 1,2 and 4 are drive/steer axle lines. All axle...

カタログの4ページ目を開く

Weights / Working speeds Telescopic boom W Hook blocks and hook Crane movements Working range Axle load Swing-away lattico

カタログの5ページ目を開く

Main boom over lear

カタログの6ページ目を開く

Main boom — free on wheels load capacities obove bold line are based on structural strength, and tipping must not b< relied upon os o limitation of lilting copacity. Rated loads musi not be exceeded. Notes for lifting capacities Rated loods do not exceed 85% of ripping load with the machine properly leveled on firrr ground. 360° duties - on outriggers fully extended. Note counterweight required OS listed in relevant lilting capacity columns* For sole crone operation duo allowance must be rode to compensate for high winds, side load, pendulum action and other hazardous conditions. No sHe...

カタログの7ページ目を開く