カタログ >
Manitowoc Cranes >
Grove GMK3060

Grove GMK3060
1 / 32ページ

カタログの抜粋

Grove GMK3060 Product Guide ASME B30.5 Imperial 85% Features • 9,7 m – 43 m (32 ft – 141 ft) six-section full power boom • Patented TWIN-LOCK™ boom pinning system • 8,7 m –15 m (28.5 ft – 49.2 ft) bi-fold lattice swingaway, hydraulic luffing or manual offset • 13 600 kg (29,983 lb) counterweight with hydraulic removal system • 265 kW (355 hp) Tier 4i Mercedes OM501LA six-cylinder turbo-charged diesel engine. ZF, AS Tronic transmission • MEGATRAK™ independent hydro-pneumatic suspension • New Manitowoc Crane Control System • New carrier cab

カタログの1ページ目を開く

Features TWIN-LOCK™ Boom pinning mechanism automatically pins the sections in position using two horizontal pins. Crane Control System The new Crane Control System offers a user-friendly interface, two full graphic displays mounted vertically for better visibility, a jog dial for easier data input and ergonomic joysticks. CraneSTAR is an exclusive and innovative crane asset management system that helps improve your profitability and reduce costs by remotely monitoring critical crane data. Visit www.cranestar.com for more information. The MEGATRAK™ suspension system is the best off road...

カタログの2ページ目を開く

Working range (main boom) 10 Load chart (main boom) Working range (with swingaway) 15 Load chart (manual offsettabIe swingaway) 16 Load chart (hydraulic offsettable swingaway) 20

カタログの3ページ目を開く

Specifications with wiper, sunvisor and window shade. Other features include diesel heater/defroster, armrest integrated crane controls, and ergonomically arranged instrumentation. Boom 9,7 m – 43 m (32 ft – 141 ft) six section, full power boom with patented TWIN-LOCK™ boom pinning system. Maximum tip height: 45,8 m (150 ft). Boom nose Five nylatron sheaves, mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve boom nose. Removable auxiliary boom nose with removable pin type rope guard. Boom elevation Single lift cylinder with safety valve provides...

カタログの4ページ目を開く

Specifications Superstructure – continued controlled from each side of carrier and the superstructure cab. Electronic crane level indicators. *Optional hook blocks Engine Parts of line Possible load with the crane* Lifting capacity Mercedes-Benz OM 501 LA six cylinder, water cooled, turbo-charged, with 265 kW (355 bhp) at 1800 rpm. Max. torque 1850 Nm (1365 ft/lb) at 1300 rpm. Compression and exhaust brakes. Engine emissions: EUROMOT/EPA/CARB (off road) Tier 4i Fuel tank capacity 300 L (79 gallons). * Requires additional boom nose sheave Transmission *Optional equipment ZF, AS Tronic, 12...

カタログの5ページ目を開く

Specifications Carrier – continued Miscellaneous standard equipment Steering Dual circuit, hydraulic power assisted steering system. Transfer case mounted, ground driven emergency steering pump. Axles 1 and 2 steer on highway. Separate steering of the 3rd axle for all wheel and crab steering, controlled by an electric rocker switch. Brakes Service brakes: pneumatic dual circuit acting on all wheels. Parking brake: pneumatically operated spring loaded brake acting on axle lines 1 and 3. Air dryer. Cab Two-man, aluminum construction with the following features: safety glass, driver and...

カタログの6ページ目を開く

Seitenansicht / side view TAINS AT THIS DOCUMENT CON INFORM ATION TH IS CONFIDENTIAL AND PANY, . PROPRIE TARY TO THE MANITOWOC COM INC OR IT SUBSIDIARIES .THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF (MANITOWOC) , REPRODUCED MANITOWOC AND IT SHALL NOT BE USED , RELEASED TO PART OR RELIED UPON BY ANY THIRD FOR ANY USE ANY THIRD Y, PARTY ATSOEVER WHOLE OR IN T,WITHOUT THE EXPRESS PAR WH , IN . WRITTEN PERMISSION OF MANITOWOC . ALL RIGHTS RESERVED Dieses Dokument enthält Informationen , die vertraulich und rechtlich geschütztes Eigentum der Manitowoc Company , Inc. , oder deren...

カタログの7ページ目を開く

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

カタログの8ページ目を開く

Transport propsal Boom over front Boom over front Basic weights - kg (lb) Mercedes power, 28.5’ – 49.2’ hydraulic offset swingaway including brackets and hose reel, 16.00R25 tires, 6x4x6 drive/steer, 2nd oil cooler, outrigger pads, auxiliary hoist, 6600 kg (14,550 lb) counterweight fixed to superstructure, driver and tanks filled. Additions: 6x6x6 drive/steer Electric driveline retarder Spare wheel 14.00 R25 XGC steel rim with stowage Spare wheel 16.00 R25 XGC steel rim with stowage Spare wheel 20.5 R25 XGC steel rim with stowage 1000 kg (2200 lb) counterweight slab clamped to...

カタログの9ページ目を開く

Working range Main boom Height from the ground in feet Operating radius in feet from axis of rotation Hook block and 3 s heave quic with Anti-Two Block Activated. 35 USt,Headache Ball,k-reeving 5 USt s ingle headache ball Dimensions are for Largest Grove furnished Hook Block Tip heights shown in the working range diagram do not consider loaded boom deflection. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

カタログの10ページ目を開く

Load chart Main boom Boom Extension Boom Radius **Over rear with special equipment THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

カタログの11ページ目を開く

Load chart Main boom Boom Boom Extension Boom Radius Boom Extension THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

カタログの12ページ目を開く

Load chart Main boom Boom Extension Boom Radius Boom Extension THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

カタログの13ページ目を開く