GCD15
1 / 28ページ

カタログの抜粋

Product Guide ASME B30.5 Imperial 85%, Metric 85% • Load sensing hydraulic piston pump • 12,5 m (41 ft) three-section full-power boom • Mechanical lever proportional controls • 8,1 t (9 USt ) deck carrying ability • Dual fuel and diesel engine options

カタログの1ページ目を開く

Features > Operator focused design The GCD15 is designed with the operator in mind. A storage tray and main storage box are located in the front center of the carrier and are suitable for storing the downhaul ball or hook blocks available on this model. Stow rigging equipment in a storage box located on the right hand side of the machine. This compartment has a latched door to prevent accidental opening when machine is in operation. The GCD15 also includes a full LED lighting package (improved visibility and longer lasting). > Operator cab Simple operator cab features direct-to-valve...

カタログの2ページ目を開く

GCD15 benefits EPA Tier 4 Final emissions compliant without the use of a SCR or UREA injected DEF system. No Diesel Exhaust Fluid (DEF) required. The GCD15 includes many easy to operate features such as mechanical lever proportional controls, independently controlled single-stage oblique outriggers and a simple to operate RCL system. An optional 5,3 m - 15,2 m (17.3 ft - 50 ft) four-section, fullpower main boom and a 4,6 m (15 ft) fixed swingaway extension are available to offer higher reach. Customer focused design with more operator comfort in the cab and storage for the downhaul and...

カタログの3ページ目を開く

Dimensions Tire size 385/65 D22.5 Two-wheel steer (radius) Four-wheel steer (radius) GROUND PLANE D OUTSIDE TURN RADIUS 2444 mm (8' 2") 1662 mm (5' 5") E INSIDE TURN RADIUS

カタログの5ページ目を開く

Working range 41' boom with 15' rigid boom extension Boom and extension length in feet Operating radius in feet from axis of rotation THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの7ページ目を開く

NOTE. ( ) Boom ang|es are in degrees. 80101697 NOTE: ( ) Boom angles are in degrees. 80101696 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの8ページ目を開く

NOTES: 1. 15 ft boom extension may be used for single line lifting service only. 2. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 80101699 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの9ページ目を開く

18 ft - 41 ft Stationary Defined arc over front Pick & Carry Over front 1. Capacities are in pounds and do not exceed 75% of tipping loads as determined by test in accordance with SAE J765. 2. Capacities are applicable to machines equipped with outrigger R4 385/65 D22.5 at 125 psi cold inflation pressure. 3. Capacities are applicable only with machine on a smooth, level and firm surface. 4. Defined Arc - Over front includes 8° on either side of longitudinal centerline of machine. 5. All rubber lifting depends on proper tire inflation, capacity and condition. Capacities must be reduced for...

カタログの10ページ目を開く

Working range 50' boom with 15' rigid boom extension Boom and extension length in feet Operating radius in feet from axis of rotation THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの11ページ目を開く

NOTE: ( ) Boom angles are in degrees. 80101703 NOTE: ( ) Boom angles are in degrees. 80101702 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの12ページ目を開く

NOTES: 1. 15 ft boom extension may be used for single line lifting service only. 2. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの13ページ目を開く

Stationary Defined arc over front Pick & Carry Over front Pounds Radius in Feet 1. Capacities are in pounds and do not exceed 75% of tipping loads as determined by test in accordance with SAE J765. 2. Capacities are applicable to machines equipped with outrigger R4 385/65 D22.5 at 125 psi cold inflation pressure. 3. Capacities are applicable only with machine on a smooth, level and firm surface. 4. Defined Arc - Over front includes 8° on either side of longitudinal centerline of machine. 5. All rubber lifting depends on proper tire inflation, capacity and condition. Capacities must be...

カタログの14ページ目を開く

Working range Boom and extension length in meters Operating radius in meters from axis of rotation THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの15ページ目を開く

NOTE: ( ) Boom angles are in degrees. 80101709 NOTE: ( ) Boom angles are in degrees. 80101708 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの16ページ目を開く

NOTES: 1. 4,6 m boom extension may be used for single line lifting service only. 2. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane

カタログの17ページ目を開く