10000B-1
1 / 24ページ

カタログの抜粋

Grove Manitowoc National Crane Potain Product Guide • Max boom +jib combination: • 535 fpm maximum line speed • 25,200 lb rated line pull

カタログの1ページ目を開く

Self-erecting counterweight Eliminates the need for an assist crane, and also allows for reduced counterweight chart operation. Retractable crawlers Crawlers can be extended and retracted for better jobsite maneuverability. On some models, these crawlers can also ship attached for easier transport and quicker setup. Energy saving systems Green-Engine mode conserves fuel during full speed drum operation under load, at a lower engine RPM. Other available options include Green-Winch Mode and Auto Idling Stop Mode.

カタログの2ページ目を開く

Outline dimensions Load chart notes 13 Main boom range / load charts 16 Fixed jib range / load charts 18 Manitowoc Crane Care 22

カタログの3ページ目を開く

Specifications Upperworks Engine HINO J08E-UV, 6 cylinder, water-cooled diesel, direct fuel injection with turbocharger, 213 kW (285 HP) at 2100 high-idle RPM. Maximum torque 1017 N•m (750 lb•ft) net at 1,600 rpm; Interim Tier 4/Stage IIIB (Required for sale in the US/Canada/Europe; requires "Ultra Low Sulfur Diesel") One diesel fuel tank, 400 liters (105 gallons) capacity. Two 12 volt 136 AH capacity batteries, 24 volt system and 90 amp alternator. All wiring harnesses and connectors are numbered for easier servicing. Machine is equipped with individual fused branch circuits. Controls...

カタログの4ページ目を開く

Boom support system Single drum powered by a hydraulic axial piston motor through a planetary reducer. Lights: 2 - Front flood lights 1 - Cab inside light Lowerworks Brake: A spring-set, hydraulically released multipledisc brake is mounted on the boom hoist motor. An external ratchet is fitted for locking the drum. Drum: Single drum, grooved for 20 mm diameter wire rope. Boom Hoist reeving is 10-part line. The durable carbody features steel welded construction with extendible axles. Wire Rope Capacity: Drum 508 ft working length. Line speed: Single line on the first drum layer Hoisting:. ....

カタログの5ページ目を開く

Specifications Optional boom inserts are available to provide extension capabilities. They also have welded lattice construction with tubular, high-tensile steel chords and pin connections on each one of 3,0 m (10'), 6,1 m (20'), 12,2 m (40') inserts. Maximum total length of boom 70,1 m (230'). The optional fixed jib employs welded lattice construction with tubular, high-tensile steel chords with pin connections between sections. Basic jib length 9,14 m (30') consists of jib butt section 4,57 m (15') and jib top section 4,57 m (15'). Optional jib boom inserts of 3,0 m (10'), 6,1 m (20') are...

カタログの6ページ目を開く

Outline dimensions

カタログの7ページ目を開く

Outline dimensions Upperworks Length Width Height Weight Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, boom butt, full hydraulic fluid reservoir, and one third tank of fuel. Length Width Height Weight Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and one third tank of fuel. Upperworks without crawlers Length Width Height Weight Note: Weight includes base machine, gantry, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and one third tank of fuel....

カタログの8ページ目を開く

Outline dimensions Hydraulic jack (if removed) Carbody counterweight with float xl Carbody counterweight without float x 1

カタログの9ページ目を開く

Outline dimensions Boom butt 25' Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Note: Use of one “A” type insert with lug required for any boom combinations that require a 40' insert. Length Width Height Weight

カタログの10ページ目を開く

Outline dimensions Fixed jib top Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight

カタログの11ページ目を開く

Performance data Line pull Rated line pull lb *Maximum line pull Front drum Rear drum * Maximum line pull is not based on wire rope strength. Wire rope specifications Diameter mm Rear drum Boom hoist drum Third drum (optional) Front drum Front and rear winch performance (optional: third winch) Line speed ft/min 1 Rated line pull Single line pull lb NOTE: Line speeds and line pull based on single line. Line pulls are not based on wire rope strength.

カタログの12ページ目を開く

Load chart notes 1. Rated loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing level on firm supporting surface under ideal operating conditions.The user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven ground, out-of-level conditions, wind, side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load). 2. Capacities do not exceed 75% of minimum...

カタログの13ページ目を開く

Boom combinations No. 10000B-1 heavy-lift boom combinations Boom inserts Boom length ft * NOTE: One 40 ft boom insert with lug 40A is required for fixed jib. When no jib is installed a 40 ft boom can be used instead of 40A. Model 10000B-1 main boom 230 ft 10 ft boom insert 10 ft boom insert Model 10000B-1 Main boom 230 ft

カタログの14ページ目を開く

Boom combinations No. 10000B-1 fixed jib combinations Fixed jib inserts Fixed jib length ft Model 10000B-1 main boom 200 ft Model 10000B-1 Fixed jib on main boom 270 ft

カタログの15ページ目を開く

Heavy-lift boom range diagram No. 10000B-1 main boom Height above ground ft Distance from centerline of rotation ft

カタログの16ページ目を開く

Heavy-lift boom load charts Model 10000B-1 liftcrane boom capacities - 10000B-1 main boom 76,280 lb crane counterweight, 14,330 lb carbody counterweight crawler extended 360° Rating Boom ft Meets ASME B30.5 Requirements – Capacities do not exceet 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. For complete chart, refer to www.cranelibrary.com. Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

カタログの17ページ目を開く