log max 7000XT Fixed Head
1 / 101ページ

7000XT Fixed Head User Manual User Manual in Original

About this manual 11 Information about warranties and complaints 19 Demands placed on the machine owner 21 Demands placed on the carrier 21 Frame and protective cover 24 Upper wear plate 24 Lower wear plate 24 Upper delimbing knife 25

Active Friction Control™ (AFC) 26 Hydraulically controlled upper delimbing knife 26 Right and left delimbing knives 26 Lower delimbing knife 26 Fixed delimbing knife 26 Diameter measurement unit 28 Length measurement unit 29 Length measurement with measuring wheel 29 Chain lubrication, Super Greasy 32 Find End (Root search) 33 Transport of unattached head 35 Transport of head mounted on the carrier 36 Parking on completion of the work 44 Unforeseen operational stoppages 44 Parking the head prior to inspections and maintenance 48

Parking in the tilted up position 48 Parking in the tilted down position 48 Make sure that the head does not have any cracks 49 Inspecting stop buffers 50 Inspecting electrical wiring 50 Inspecting wear plates 50 Upper wear plate 50 Lower wear plate 50 Inspecting and adjusting the protective cover and over- 51 centre latches Axles for feed roller arms and delimbing knives 51 Inspecting Log Max’s standard shafts 51 Inspecting axial play 52 Delimbing knives’ edges 53 Upper delimbing knife 53 Right and left delimbing knives 54 Lower delimbing knife 54 Fixed delimbing knife 54 Upper delimbing...

Replacing measuring wheel tracks 61 Inspecting chain shot guard 63 Fill with saw chain oil 63 Checking saw chain lubrication 64 Inspection of saw chain sprocket and saw chain catcher 65 Replace saw chain sprocket and saw chain catcher 66 Check the saw chain tension. 67 Check the saw chain tension. 71 Replacing the hydraulic hose 74 Hydraulic hose with ORFS couplings 74 Hydraulic hose with BSP couplings 75 Hydraulic hose with banjo coupling 76 Hydraulic hose with JIC coupling 77 Hydraulic hose with WEO coupling 78 Inspection and replacement of accumulators 78 Inspection and adjustment of the...

Dimensions and basic weight. 95 Weight of extra equipment 95 Minimum hydraulic system requirements 96 Requirements regarding saw chain oil 97 General tightening torques 98 General tightening torques with Nord-Lock washers 99 General tightening torque for Expander 99

Foreword About this manual These instructions are for the Log Max 7000XT Fixed Head grapple harvester. The manual provides information about how the harvester head (subsequently referred to simply as the “head”) works, is maintained and is used safely. Before starting to use the head, carefully study the manual. The manual principally covers the basic mechanical and hydraulic design, function, operation and maintenance of the head. The demands placed on and the functionality of the head’s electrical control system are only covered in general terms. Note! Your head is not necessarily fitted...

Note! To avoid any misunderstanding, it is safest to submit comments and suggestions in English or Swedish. Below are a summary and explanation of specific expressions that are used in this manual and that are not explained elsewhere.

Safety General Incorrect use of the head can result in serious injuries to the operator as well as serious damage to the head and the surroundings. It is therefore important to read, understand and follow the instructions in this manual before starting to use the head. If the provisions in this manual deviate from local laws and regulations, you are obligated to comply with local laws and regulations. Warnings and symbols The following warnings and symbols are used in this manual to alert you to risks that could result in personal injury or death. Danger! Danger indicates that an accident...

Note! Clarifies information that is important for understanding or executing operations. Safety stickers Safety stickers must be clearly visible, legible and complete. If a sticker is damaged or missing, it must be replaced. Safety stickers can be ordered from your dealer. Head The head is equipped with safety stickers that warn about circumstances that could result in serious injury or death. The safety stickers have a yellow background. The following safety stickers are affixed to the head: 1. Warning about chain shots 2. Warning of crushing risk Carrier The carrier’s crane must be...

All work using the head may only be carried out by individuals possessing the requisite knowledge about the work that is to be carried out. This applies in particular, although not solely, to: Requisite knowledge refers to the knowledge that is required to carry out the work correctly and safely. Use the protective equipment that is necessary for the work that is to be carried out, for example: helmet, safety shoes, gloves, ear defenders, safety goggles. The head is intended solely for logging work, where the head fells and processes trees. Any other use is prohibited. Examples of...

The operator is obliged to stop work immediately if someone is within the risk zone. Chain shot When a saw chain breaks, parts of the saw chain can be thrown out at high speeds. If saw chain breaks with a whiplash, the speed of these parts may be several times higher than the speed of the saw chain. Danger! Chain shots are associated with danger to life! The energy in the event of chain shot can be equivalent to that of a bullet from a rifle. It is therefore essential to follow the instructions regarding the use of the head and maintenance of the saw unit.

In the event of chain shots, parts of the saw chain can travel outside of the head’s risk zone. When activating the saw unit, the head must be positioned so that there is no risk of chain shots hitting: • people outside the risk zone. • other machines. • other property. The head is equipped with a chain shot guard. The guard is integrated into the head’s frame. Under no circumstances may the guard be modified. Do not use the head if the guard has been damaged or its function has otherwise been impaired. A crushing risk exists by the head’s moving parts. Follow the instructions in this...