Rigi Series
1 / 8ページ

Rigi Series Horizontal Lathes

Rigi Series Rigi 15S LARGE SAVING IN FLOOR SPACE The Rigi 15S, excluding chip conveyor, takes a floor space of only 2.15 sq.mts. The frontage is 1.2 metres thereby limiting the operator movement. Smaller floor space results in cost saving. Shor ter man movements directly adds to the efficiency of manufacturing. Daily inspection points are either at the front or at the rear of the machine. This eliminates maintenance needs from the sides, allowing the Rigi 15S to be installed in a line with minimal space and the cost thereof. HEAVY DUTY MACHINING OF PRECISION TURNED PARTS The rigid slant bed...

MOVING RANGE (Quill (Tallstock Base Stroke) Stroke) SPEED POWER CURVE

Computerised numerically controlled 2-axes Lathe, complete with hydraulic turret, coolant unit, hydraulic unit and other standard accessories suitable for operation on 415V + 10%, 3 phase, 50 cycle AC supply and capable of per for ming a variety of machining operations such as straight tur ning, drilling, boring, contouring with linear and circular interpolation, inter nal and exter nal threading etc. The machine base is of rigid, sufficiently wide torsion-free box type construction. Bed, saddle and all major castings is of high grade FG 300 grey cast iron, duly stress relieved. The machine...

TURRET INTERFERENCE Spindle Center Line MOVING RANGE Zero Return Position 822 Admit Between Centers Quill Stroke Tailstock Base Stroke SPEED POWER CURVE High Speed INSTALLATION DIAGRAM Front View

Higher rigidity Unmatched reliability Hardened and ground guideways Large diameter tur ning Excellent repeatability SPECIFICATION Title MOVING RANGE Unit Swing over carriage Interference free turning dia Spindle nose Spindle front bearing – ID Spindle bore taper Spindle motor power Cross travel X-axis Feed Hole through spindle Spindle speed Longitudinal travel Z-axis Rapid traverse rate X axes Rapid traverse rate Z axes CNC System Machine Size Tool shank size Turret indexing Weight (Approx.)

TURRET INTERFERENCE INSTALLATION DIAGRAM SPEED POWER CURVE High Speed

Note: Specifications and colours are subject to change without prior notice. Accessories shown may not be part of standard equipment. MACHINE TOOL DIVISION Arasur, Coimbatore - 641 407, India. Phone : +91 422 3021300, 3021393 | Fax : +91 422 3021331, 3021399 E-mail : mtd_marketing@lmw.co.in | mtdsales@lmw.co.in LAKSHMI MACHINE WORKS LIMITED